H5BBT-10104-W9

Series:	DF7
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Contact End:	Socket to Socket
Moisture Sensitivity Level (MSL):	--
Length:	4.00" (101.60mm)
Wire Gauge:	18 AWG
Contact Finish:	Tin
Color:	White
Contact Finish Thickness:	--
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper WiresJumper wires are a type of connector used to facilitate easy and efficient connection between two components in a circuit. They are commonly found in DIY electronics and prototyping circuits. Jumper wires are often the simplest, most convenient way of creating tight, reliable connections between boards. Jumper wires are typically made from a flexible, durable plastic that is able to resist stresses related to extended use, such as vibration and temperature changes. The ends of the wires contain an exposed metal conductor, usually copper-plated, that provides electrical connectivity between components.Jumper wires can come in many sizes, from very short ribbons of wire barely longer than the connectors they plug into, to long, continuous wires that can be used to make connections even at completely different locations on a circuit board. Wires are usually supplied in many different colors, allowing for both easy organization and quick visualization of how a circuit is wired.Pre-Crimped LeadsPre-crimped leads are another type of connector that is used in many DIY electronics and prototyping circuits. Pre-crimped leads are wires with a pre-attached connector on one end. The connectors may have a variety of shapes, sometimes resembling a conventional screw or nut, or in other cases being a simple metal bracket that can be easily pressed onto two components to establish a connection.Unlike jumper wires, pre-crimped leads are not meant to be used for quick-and-easy prototyping circuits. They are intended for permanent installation as part of an electrical system. This is why they come in a variety of sizes, materials, and countless different configurations. As a result, it is essential to choose the right size and type of pre-crimped lead before attempting to install it into a circuit.H5BBT-10104-W9 Application Field and Working PrincipleThe H5BBT-10104-W9 is an IEEE 802.3bt- compliant 2-pair power sourcing equipment application-specific integrated circuit (PSE ASIC) with IEEE-standard connectors, designed for use in power-over-ethernet applications. This device can be used in security cameras, wireless access points, and other electronic systems that need to be powered using the 802.3bt protocol.The H5BBT-10104-W9 has a 5V 1A power rating and features an auto-negotiation system that is compatible with both 10 Mb/s and 100 Mb/s ethernet link protocols. This device is equipped with 10/100 base-T Ethernet physical layer transceiver circuitry, which is responsible for providing the devices with two-way data communication across an Ethernet-based power-sourcing network.The PSE ASIC embedded in the H5BBT-10104-W9 is designed to detect the voltage level on the twisted pair and negotiate a PoE-standard power injection. Once the voltage level is detected, the integrated processor will control the following functions: high-voltage (HV) polarity reversal, startup potential, idle power reduction, power-saving Mode-A/B, power reset time, link down reset time, link status, over-current protection, and auto- detect.In conclusion, the H5BBT-10104-W9 is an IEEE 802.3bt- compliant PSE ASIC with 10/100 base-T Ethernet physical layer transceiver circuitry that is suitable for use in power-over-ethernet systems. Its features and functions make it a reliable device to provide power and data transmission for a variety of digital systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description