H5BBT-10110-S2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires and Pre-Crimped Leads are both popular products in the electrical industry. The application field and working principle for the H5BBT-10110-S2 are typical of the two, and this article will provide a brief overview of them.

Jumper Wires

Jumper Wires are multi-conductor wire assemblies with electrical contacts at each end. They are generally used to bridge two electrical circuits or points together, providing fast and secure connections. The H5BBT-10110-S2 Jumper Wire has a male 12-pin connector at one end and a female 12-pin connector at the other, along with a total of 60 wires. The application field typically includes scenario-based testers, automotive harness testers, prototyping PCB boards, troubleshooting/repair, and many other automotive applications.

In terms of working principle, Jumper Wires provide a direct connection between two points by bridging the gap between them. The number of wires used and the type of breakaway connector used will determine the amount of voltage and current the Jumper Wire can supply. Most Jumper Wires are designed to carry current of a specific capacity. With the H5BBT-10110-S2 Jumper Wire, it is built with a 12-pin connector on both ends and can carry an electrical current of up to 250 Volts (V) and up to 2.5 Amps (A).

Pre-Crimped Leads

Pre-Crimped Leads are very similar to Jumper Wires but also differ in several ways. Primarily, Pre-Crimped Leads are typically designed for a single device or system and offer more flexibility when compared to Jumper Wires. The H5BBT-10110-S2 Pre-Crimped Lead is a 12-pin connector with two 30-gauge wires and a total of 60 pins. This type of product is used to create custom length wires in order to connect two devices together. In the automotive industry, Pre-Crimped Leads are commonly used for making wiring harnesses, in-car audio systems, and many other applications.

The working principle for a Pre-Crimped Lead is the same as a Jumper Wire – provide a direct connection between two points. However, instead of having a breakaway connector, the Pre-Crimped Lead uses a crimped connector that is crimped to the wire. This provides additional benefits such as improved connection reliability and increased current carrying capacity. With the H5BBT-10110-S2 Pre-Crimped Lead, it can handle up to 250 Volts (V) and up to 2.5 Amps (A).

Conclusion

In conclusion, the H5BBT-10110-S2 is a popular product in the electrical industry, with both Jumper Wires and Pre-Crimped Leads being the two most popular products in its application field. The working principle for both products is essentially the same – provide a direct connection between two points – although the type of connector and amount of current carrying capacity can differ. With the H5BBT-10110-S2, it can handle up to 250 Volts (V) and up to 2.5 Amps (A).

The specific data is subject to PDF, and the above content is for reference