H6BXT-10102-A7

Series:	EnerBee™ DF22
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Socket to Cable (Round)
Moisture Sensitivity Level (MSL):	--
Length:	2.00" (50.80mm)
Wire Gauge:	16 AWG
Contact Finish:	Tin
Color:	Orange
Contact Finish Thickness:	--
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.Magnet wire, generally referred to as enameled wire, is a wire used in electrical applications. It is composed of a thin insulated copper core that is coated with a thin layer of enamel insulation material. This enamel insulation layer prevents the copper wire from shorting out and provides an extra level of protection for the wire. The H6BXT-10102-A7 application field and working principle is one of the most commonly used magnet wires and is perfect for a wide range of applications.H6BXT-10102-A7 magnet wire encoding stands for: H = Horizontal, 6 = Continuous Film, B = FPC or Flat Panel, XT = XT Coatings, 10 = 10 Gauge, 1 = Single Core, 0 = Unused,2 = AWG, A = Heat Resistance, 7= High Temperature/Heat Resistance. The wire is made from stranded bare copper conductor with an insulation layer of polyamide-imide/polyesterimide enamel. It has a UL 1581 approved jacket made from polyurethane or polyester. Additionally, it also meets certification standards such as RoHS, UL 1581, SAE and ASTM. The H6BXT-10102-A7 application field is wide and it can be used in motors, transformers, coils, relays, circuit breakers, inverters, switches, relays, transformers, etc. The temperatuer range of H6BXT-10102-A7 magnet wire varies from -55℃ to 155℃. Its properties make it suitable for medium-sized coils and transformers, and its resistance to heat, mechanical fatigue, and corrosion is impressive.H6BXT-10102-A7 is often used in conjunction with jumper wires and pre-crimped leads. Jumper wires are short cables that are used to connect two points together on a circuit board, either directly or through other components. Jumper wires are typically used in prototyping or during repairs to reduce the amount of wiring that needs to be done. The length, wire gauge, insulation, and connectors of the jumper cable will vary depending on the application. Pre-crimped leads are used to easily connect components together to create a circuit. They can be insulated or uninsulated and are made of either heavy or light insulated wire. They can be used with various crimping applicators to easily and quickly attach components to a circuit.H6BXT-10102-A7 has a specific working principle. This wire is wound around a wire form to create a coil. The inner part of the wire that is exposed is where electrons flow. The outer insulation material prevents the wire from shorting out and increases the current carrying capability of the wire. The enamel insulation also increases the overall strength and flexibility of the wire form, allowing it to withstand forces and stresses that would normally damage the wire.In summary, the H6BXT-10102-A7 application field and working principle provides a wide range of applications and is often used in conjunction with jumper wires and pre-crimped leads. It has a wide temperatuer range and impressive resistance to heat, mechanical fatigue, and corrosion. Its specific working principle helps to create a coil with increased current carrying capability and increased strength and flexibility.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description