HCPL-050L-000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optocouplers, are components that electrically isolate two circuits while providing them with the necessary information to be relayed. This isolation means both circuits are not directly connected and therefore, if either circuit experiences a fault, the other circuit will not be compromised. The HCPL-050L-000E is an example of an optoisolator and is categorised as a transistor, photovoltaic output optoisolator.

The HCPL-050L-000E is a dedicated low voltage optoisolator which is suitable for a variety of applications, from industrial to consumer. Consumer applications may include data processing, security and solid state lighting while industrial uses may include access control, safety systems and automation. Some of its features include: isolated power output; low saturation voltage; and low μA current consumption. This optoisolator has a minimum isolation voltage of 5000 Vrms. It is capable of operating from -40 to 105°C and has a creep distance of 3.2mm. Furthermore, its lead free finish ensures it meets environmental regulations regarding the use of hazardous substances.

The working principle behind the HCPL-050L-000E optoisolator is quite straightforward and relies on photoemitters that emit light when a current flows through them. When light is detected, it triggers a phototransistor and causes it to conduct current. The input (emitter) and output (transistor) are isolated by an optically coupled barrier which prevents the two circuits from coming into direct contact with each other. This means the two circuits will not interfere with one another, and any faults in either circuit will be isolated and confined to that particular circuit.

In conclusion, the HCPL-050L-000E is an optoisolator of the transistor, photovoltaic output category. This optoisolator is suitable for a wide range of applications, from consumer to industrial, and it features a low saturation voltage, low current μA consumption and a minimum isolation voltage of 5000 Vrms. Its working principle consists of a photoemitter which emits light when current is passed through it, triggering the phototransistor, thus isolating the input and output circuits with an optically coupled barrier.

The specific data is subject to PDF, and the above content is for reference