HCPL-2211#500

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic Output

Optoisolators are used to provide electrical isolation between two circuits. In many applications, it’s necessary to ensure that power sources can’t be inadvertently connected to each other and that currents flowing in one circuit are not allowed to interfere with currents flowing in another. An optoisolator is a device that contains a light-emitting diode (LED) and a photosensor, and it acts to couple an input signal from one circuit to another while at the same time maintaining electrical isolation between the two circuits.

The HCPL-2211#500 optoisolator is a logic output optoisolator, which means that it’s used to transfer a logic-level signal from one circuit to another. This particular device uses an LED input, which is an input voltage at the logic level of 0-2.4V. The output of the HCPL-2211#500 is a transfer transistor, which can be configured to either an active-low (open collector) or active-high (open emitter) configuration. The output is also a logic-level voltage, either 0-0.4V for active-low or 12-16V for active-high.

The working principle of the HCPL-2211#500 logic output optoisolator is relatively straightforward. When the LED input voltage rises above 1.6V, the LED inside the optoisolator will be turned on, allowing current to flow. This current will be detected by the photosensor, which will cause the transfer transistor to activate. Depending on the settings of the output, the transistor will either close (in active-low configuration), allowing the output voltage to drop to 0-0.4V, or open (in active-high configuration), allowing the output to rise to 12-16V. When the LED input voltage falls below 0.9V, the LED will be turned off, the photosensor will detect this, and the transfer transistor will switch back to its original configuration, either off or on.

The HCPL-2211#500 is commonly used in applications such as telecommunications, industrial control systems, industrial automation, and medical devices. In telecommunications, it can be used to transfer signals from a microprocessor to telephone handset or line interface circuitry, where electrical isolation is mostly required due to the high voltages that can be present in the circuitry. In industrial control systems, it can be used to transfer logic-level signals from a controller to a motor driver, enabling the motor to be switched on or off without the controller needing to be directly connected to the driver circuit. In industrial automation, the optoisolator can be used to convert logic signals from a programmable logic controller (PLC) into a higher-voltage signal which can be used to drive a relays or solenoids, enabling it to control larger and more powerful devices such as motors and pumps. In medical devices, an optoisolator can be used to transfer signals between devices, ensuring that each device remains electrically isolated from one another and preventing potential electrical shock.

In conclusion, the HCPL-2211#500 logic output optoisolator is a versatile device that can be used in a variety of applications in order to provide electrical isolation between two circuits. Its simple working principle and wide variety of applications make it an ideal choice for many electronic projects.

The specific data is subject to PDF, and the above content is for reference