HCPL-2300#560

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optocouplers or optical couplers, are devices used to isolate electrical signals between two circuits by using light. Often used to protect a control circuit from a power circuit, optoisolators are available in a variety of configurations and employ different technologies, such as LEDs and phototransistors. The HCPL-2300#560 is a logic output optoisolator produced by Avago and is one of the most popular optoisolators in the industry. This device’s main application field is the protection of power electronic control circuits from the power circuit.

The HCPL-2300#560 optoisolator consists of a 6-pin mini-flat IC package with an LED, photodiode, and transistor. The LED uses 4.3V max to light up and is connected to an internal photocell, a photodiode, which then turns on an internal phototransistor. This is then connected to the output pin. The transistor is controlled by the light emitted from the LED and can switch from OFF to ON in only 25 ns.

The HCPL-2300#560 optoisolator is used mainly to protect control circuits from power circuits. It does this by completely isolating the two circuits, thanks to the internal LED and photodiode, thus preventing any electrical noises or interference. This makes the device suitable for use in various power electronics control applications, such as motor controllers, automatic welding machines, and robotic manipulators.

The working principle of the HCPL-2300#560 optoisolator is based on the connection between an LED and a phototransistor. The LED is the input, the photodiode is the intermediate, and the phototransistor is the output device. When the LED is energized, it emits light which is then picked up by the photodiode, thus turning on the photo transistor. The photo transistor then switches from OFF to ON, sending an output signal to the load.

The switch time of the HCPL-2300#560 optoisolator is 25 ns, which is faster than most optoisolators in the market. This makes it suitable for use in fast switching applications, such as motor controllers. The device also features a low input current of 3 μA and a common-mode transient immunity of 1500 V/μs.

In addition, the HCPL-2300#560 optoisolator is a cost-effective solution for noise immunity and is highly reliable due to its low leakage current (8μA maximum). These features make the device suitable for a wide range of applications, including motor control, power switches, and security systems.

To summarize, the HCPL-2300#560 is a logic output optoisolator produced by Avago. This device’s main application field is the protection of power electronic control circuits from the power circuit and it is highly suitable for a wide range of applications, such as motor controllers, automatic welding machines, and security systems. Its features include a 25 ns switching time, a low input current of 3 μA, and a common-mode transient immunity of 1500 V/μs. These features make the device a cost-effective and reliable solution for noise immunity.

The specific data is subject to PDF, and the above content is for reference