HCPL-2533-300E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators – Transistor, Photovoltaic Output are components designed to prevent a high voltage circuit from affecting a low voltage circuit. This compartmentalization of high and low voltage circuits is done to maintain the integrity of the low voltage circuit, which can be easily damaged when in contact with a high voltage circuit. The HCPL-2533-300E is an example of an optoisolator that performs this task. It has datasheets, a pin out diagram and application examples to demonstrate the part’s capabilities.

The HCPL-2533-300E consists of an LED optically coupled with a photovoltaic transistor-out. The LED emits light, and when the light is sensed by the photovoltaic transistor-out, an electrical signal is sent. This electrical signal travels through the transistor-out, providing a barrier for the high voltage circuit. By isolating the two circuits, the risk of the high voltage circuit damaging or corrupting the low voltage circuit is greatly reduced. In addition, the HCPL-2533-300E is designed with built-in protective circuitry, further increasing protection of the low voltage circuit.

The HCPL-2533-300E has a number of applications. For example, it can be used in industrial equipment or medical devices, which often need to maintain a low voltage supply but operate in a high voltage environment. It can also be used in electronic testing equipment, where an isolator is necessary to prevent damage to the instrument and any external devices connected to it. Additionally, the HCPL-2533-300E can be used in automotive and marine applications, where high voltage circuits need to be separated from the vehicle\'s low voltage systems.

The HCPL-2533-300E utilizes a standard working principle of LED optoisolators. First, an electric current is run through the LED, which emits light. This light is picked up by the photovoltaic transistor-out. When the photovoltaic transistor-out detects the light, it sends an electrical signal back. This signal is then used to either open or close a switch, depending on the type of optoisolator used. In the case of the HCPL-2533-300E, the output transistors are configured as NPN (N-Channel) and PNP (P-Channel) and can be used to control or sense AC signals.

The HCPL-2533-300E also has some good features, such as an integrated optical limiting circuit that helps to protect the LED from being overloaded with current and voltage. The data sheet also states that the device is capable of high breakout voltage, high input to output isolation resistance (3kV minimum) and high common mode transient immunity (2000 V/μs). Additionally, the device can operate with a wide range of LED currents, ranging from 1mA to 25mA.

The HCPL-2533-300E is a reliable and versatile optoisolator that can be used to protect high voltage circuits from damaging their low voltage counterparts. Its easy to understand pin out diagram, application examples and feature set make it a popular choice for engineers and technicians in industrial or medical settings. With its protection and safety features, it is clear that the HCPL-2533-300E is a sound choice for protecting delicate circuits and systems.

The specific data is subject to PDF, and the above content is for reference