HCPL-2611-320E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, or optocouplers, are electronic devices which are designed to isolate electrical circuits from each other with the aid of a light-emitting diode (LED) and a photodiode. Optoisolators are often used in the electronics industry to prevent electrical noise from crossing from one circuit to another, thus protecting sensitive components and circuits from any potential damage. The HCPL-2611-320E is a type of optoisolator with a logic output. This type of optoisolator is used in applications where an electrical circuit must be isolated from another, without requiring a high-voltage electrical barrier.

The HCPL-2611-320E logic output optoisolator consists of an infrared LED coupled to a photodetector. This arrangement allows the LED to receive electrical signals from one circuit and transfer them to the photodetector, which then transmits them to another electrical circuit. The LED and photodetector are hermetically sealed within a single package, which provides electrical isolation between the two circuits and prevents electrical noise from crossing between them.

The HCPL-2611-320E optoisolator can switch at both 5V and 3.3V logic levels. This is a useful feature for applications where the logic levels of different circuits may vary, such as a microcontroller-based system. As such, the HCPL-2611-320E is used in various data communication and interface applications, such as digital logic interfacing, transceivers, and microcontroller-based systems.

The HCPL-2611-320E is a single channel optoisolator which consists of an LED and a photodetector embedded in a hermetically sealed package. The LED is the signal source, while the photodetector is the receiver. When the LED is illuminated, the photodetector will generate an output signal in response. This output signal is used by the receiving circuit to interpret the input signals from the LED.

The working principle of the HCPL-2611-320E is based on the emission of light from the LED. When a voltage is applied to the LED, electrons will be released and an electrical current will flow through the LED. This current will create excited electrons which will subsequently emit a specific wavelength of light. This light is then detected by the photodiode, which then converts the light into an electrical current that can be used by the receiving circuit.

In addition to its use in data communication and interface applications, the HCPL-2611-320E is also suitable for automotive and industrial applications. This type of optoisolator is often used to allow a low-voltage circuit to interact with a higher voltage circuit, without any potential hazard. They are also used in relay systems to provide a logic-level output signal from a high-voltage source. As a logic output optoisolator, the HCPL-2611-320E is a practical and reliable means of electrical isolation.

The specific data is subject to PDF, and the above content is for reference