HCPL-261A-060E

Data Rate:	10MBd
Supplier Device Package:	8-DIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply:	4.5 V ~ 5.5 V
Current - DC Forward (If) (Max):	10mA
Voltage - Forward (Vf) (Typ):	1.3V
Rise / Fall Time (Typ):	42ns, 12ns
Propagation Delay tpLH / tpHL (Max):	100ns, 100ns
Series:	--
Current - Output / Channel:	50mA
Output Type:	Open Collector, Schottky Clamped
Input Type:	DC
Common Mode Transient Immunity (Min):	1kV/µs
Voltage - Isolation:	3750Vrms
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

HCPL-261A-060E application field and working principle

Optoisolators, also known as optocouplers, are special devices used to provide electrical isolation between two components. Isolation is an important part of any circuit and an opto-isolator can be used to create an isolation barrier between two different circuits. The HCPL-261A-060E opto-isolator is one such device, and this article will discuss its application field and working principle.The HCPL-261A-060E is a 6-pin logicoutput opto-isolator which is designed to provide a variety of useful functions in circuits. It is suitable for use in equipment which requires high isolation, high speed switching, and low power consumption. The device is also available in a 4-pin SOP package, making it suitable for surface mount applications.The HCPL-261A-060E has a number of applications in circuits where high levels of isolation are needed. It can be used as an isolation controller for power supply designs, as an opto-isolator for touch sensing interfaces, and as an opto-isolator for logicoutput applications. It can also be used as an isolation switch to control the switching of power supplies in personal computers and gaming consoles.The working principle of the HCPL-261A-060E opto-isolator is based on the use of light emitting diodes (LEDs) and phototransistors as the active components. The LEDs are connected in series with the opto-isolator\'s input circuit, while the phototransistors are connected in series with the output circuit. The LEDs shine light on the phototransistors, which allows them to detect the light and output the appropriate logic signal.When the LEDs are illuminated, the phototransistors will output the correct logic signal, depending on the type and amount of current flowing through the LEDs. This allows the opto-isolator to act as a switch, enabling switching or isolating signals to different circuits without the need for a physical connection between the two circuits. The HCPL-261A-060E is an excellent choice for complex logic-based applications. It has a wide range of input voltage capabilities, enabling it to operate in a wide variety of environments. The opto-isolator also has an internal surge protection circuit, which helps to protect the device from voltage spikes and current surges. The HCPL-261A-060E is an excellent choice for circuits requiring high levels of electrical isolation. Its wide range of input voltage capabilities, high speed switching, and low power consumption make it ideal for a variety of applications. By understanding its application field and working principle it can be implemented in circuits to achieve optimum performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description