HCPL-3120#300

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HCPL-3120#300 is a type of isolator used to drive logic gates. This device is an 8-pin integrated circuit, commonly used in digital circuits, to isolate an input signal (or data) from a load in order to prevent any signal distortion or degradation. It provides an isolated output stage with an effective transmission voltage of up to 10 Vrms or 600 VDC. As such, the HCPL-3120#300 is highly suitable for applications where high voltage transients and ground loops should be eliminated.

The HCPL-3120#300 comes in two different versions – the leaded version has the functionality of a complete driver and the SO-7 version which requires external drivers. The leaded version is the most commonly used and works with both unipolar and bipolar input signals, having a high impedance current/voltage input protection level of 500V. When used with bipolar inputs, there will be two outputs, one for each polarity. The output drivers of the HCPL-3120#300 can source 1.6W for any combination of logic outputs.

In terms of the working principle, the HCPL-3120#300 starts with a high impedance output stage, followed by an isolation barrier. This isolation barrier acts as an opto-isolator that breaks-up any ground loops or high voltage transients from entering the input signal. It then passes the isolated signal to the buffering stages – two level shifts and buffers. Finally, the isolated signal is output from the driver stages of the device in the required output logic format.

The HCPL-3120#300 is highly suitable for systems where the data signal must be isolated from other signals in order to prevent signal degradation or distortion due to ground loops and high voltage transients. This isolator is ideal for applications such as AC/DC drives, motor controllers, relay controls, and voltage monitoring systems.

In order to ensure optimal performance, the HCPL-3120#300 is designed to operate in an ambient temperature ranging from -40°C to 85°C and an input voltage of 5-9V. The rise and fall time of this isolator is 20ns stop-to-stop, and the response time of the output stage is 1µs minimum. Additionally, it is designed to draw a maximum power of 100mW when the input voltage is 6V.

Overall, the HCPL-3120#300 isolator provides an ideal solution to applications, requiring stable transmission of digital signals with minimal signal distortion or loss. It has a wide dimension of applications, including industrial automation, computer and communications equipment, motor control, and various other logic control systems.

The specific data is subject to PDF, and the above content is for reference