HCPL-3760

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices that provide electrical isolation between two circuits. The HCPL-3760 is an optoisolator used to transfer and amplify electrical signals between two circuits, while isolating them and protecting them from electrical interferences.

The HCPL-3760 is a single channel optoisolator, using a Transistor, Photovoltaic Output (TPO) to achieve electrical isolation between the two circuits. This optoisolator is designed to provide low current transfer and switching, and is suitable for applications where the circuit signals must remain isolated, such as between a microcontroller and an external device or a signal input and an output. It is also used to provide an additional level of protection from electrostatic discharge (ESD) and other transients.

The HCPL-3760 optoisolator operates by using two separate circuits, one an output circuit and one an input circuit. The output circuit consists of a photovoltaic output transistor. This is a device which has an internal photodiode that can detect light. Light from the input circuit passes through an integrated optical cavity and is detected by the photodiode of the photovoltaic output transistor. This causes the transistor to turn on and off, which in turn produces an output logic level signal.

The input circuit on the HCPL-3760 consists of an infrared LED (light emitting diode) which acts as an input signal source. The infrared LED is connected to a series of infrared filters that allow only light of the specific wavelength to pass through. When the input signal is activated, the LED will emit light, which is then filtered by the infrared filters before it is detected by the internal photodiode on the output photovoltaic transistor.

The HCPL-3760’s Transistor, Photovoltaic Output is what allows for the electrical isolation between the two circuits. This device is made up of two transistors connected in series. The internal photodiode on the output transistor detects the light from the LED’s and turns the output transistor on or off based on the brightness of the light. This action provides the necessary electrical isolation that prevents electrical interference between the two circuits.

The HCPL-3760 is widely used in industrial and consumer applications where isolated inputs are desired. It is capable of detecting low frequency signals, and can be used as an input for a digital or analog signal. It has many advantages such as a low cost, high speed switching, and low power consumption. It also offers a level of protection from electrostatic discharge (ESD) and other transients.

In conclusion, the HCPL-3760 is an optoisolator designed to use a Transistor, Photovoltaic Output (TPO) to achieve electrical isolation between two circuits, and is capable of detecting low frequency signals. It is widely used in industrial and consumer applications where isolated inputs are desired, and can offer protection from ESD and other transients. The HCPL-3760 is an ideal device for applications where the circuit signals must remain isolated.

The specific data is subject to PDF, and the above content is for reference