HCPL-4506

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HCPL-4506 optoisolator is part of the 5000B series of optically-coupled logic isolators from Avago Technologies. It is one of the most popular and widely used optocouplers in the world today, due to its high performance, low cost, and easy implementation.

The HCPL-4506 is a 1-Channel Logic Output Optoisolator. It is a single-throw, single-pole logic optocoupler with open collector output stage and positive logic output. The HCPL-4506 is available in a PDIP-6, SOIC-6 and MSOP-6 package. It is ideal for applications such as motor control, AC and DC isolation signalling, power line isolation, flyback voltage isolation, high voltage and high current isolation, as well as measuring link current and interfacing analogue signals.

The working principle of the HCPL-4506 Optocoupler is relatively simple. An LED (encyptic diode) is used to transfer the signal from an input circuit (for example, a TTL logic input circuit) to the collector of an output transistor, isolated from the input circuit. The input current of the LED and therefore the output current of the transistor can be adjusted with the help of an external current limiting resistor. The LED output current is limited to a maximum of 25mA, while the collector’s output current can be limited to a maximum of 250mA.

When the LED is turned on, the output of the transistor is in on-state, and when it is turned off, the output of the transistor is in off-state. The HCPL-4506 optoisolator is also equipped with a Schmitt -Trigger circuit at the input, which allows very low turn on/off times, resulting in improved noise immunity.

The HCPL-4506 is designed for an operating voltage range of 7.5V DC to 30V DC and compatible with IEC 60950 requirements for isolation. It also features low offset voltage of 1.5V, and high common mode transient immunity of ±30 kV/μs. The HCPL-4506 integrates two MOSFETs, one PNP and one NPN, with a maximum current of 50mA each and a maximum voltage of 30V.

The HCPL-4506 optocoupler can be used in a variety of applications such as motor control, AC and DC isolation signalling, power line isolation, flyback voltage isolation, high voltage and high current isolation, as well as measuring link current and interfacing analogue signals. They can also be used to transfer signals across circuits with different voltage levels, which can help reduce noise and allow safer operation in noisy environments.

In conclusion, the HCPL-4506 optocoupler is one of the most popular and widely used optocouplers in the world today due to its high performance, low cost, easy implementation and wide range of applications. It is able to provide the necessary electrical isolation and signal transmission between two circuits, and, as such, is an ideal solution for a variety of applications that require signal isolation, noise reduction, and voltage level translation.

The specific data is subject to PDF, and the above content is for reference