HCPL-5201#100

Data Rate:	5MBd
Supplier Device Package:	8-DIP Butt Joint
Package / Case:	8-SMD Butt Joint
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 125°C
Voltage - Supply:	4.5 V ~ 20 V
Current - DC Forward (If) (Max):	8mA
Voltage - Forward (Vf) (Typ):	1.3V
Rise / Fall Time (Typ):	45ns, 10ns
Propagation Delay tpLH / tpHL (Max):	350ns, 350ns
Series:	--
Current - Output / Channel:	15mA
Output Type:	Tri-State
Input Type:	DC
Common Mode Transient Immunity (Min):	1kV/µs
Voltage - Isolation:	1500VDC
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic Output:The widely-used HCPL-5201#100 is a type of module that is utilized in the field of optoisolators - logic output equipment. This type of device is frequently referred to as an optocoupler, optical isolator, or optical isolator circuit, as it is used to transmit digital signals from one source to another without any danger of electromagnetic interference. The goal of the HCPL-5201#100 is to extinguish the possibility of dealing with noise caused by signal crossovers in the form of a \'hotwire.\'Optoisolators are created with the use of an optical source and an optical receiver. The optical source is usually a semiconductor LED, which emits light. This emitted light is channeled into an optical amplifier, or photo detector, which is then coupled with the output device(s) such as an optocoupler, Triac or SCR. The signal transmission is monitored and regulated so that it may be sent cleanly and safely without the interference of adjacent wires or noise from other electrical devices.The "logic output" part of the HCPL-5201#100 terminology refers to the device\'s ability to transmit digital signals. This is done by using a signal that is in the logical "high" or "low" state; this is analogous to using the terms "1" or "0" to refer to bits of digital information. In the same way, an optocoupler can monitor and translate these signals from conforming to their "high" or "low" logic states, while still protecting the source from any sort of noise or interference.Since the HCPL-5201#100 operates on a low power and low voltage level, less heat and energy are required to run the device. This makes it safer and more efficient, as the amount of noise and interference that comes with it is much lower than the levels generated with conventional circuits. The internal configuration of the HCPL-5201#100 also helps to ensure a reliable signal transmission path, eliminating the possibility of errors due to signal crossovers.In conclusion, the HCPL-5201#100 is a type of optoisolator that is ideal for use in the field of logic output. Its low power and low voltage internal configuration makes it an incredibly safe and reliable way to transmit digital signals without the possibility of signal crossovers or any sort of noise or interference. This makes it perfect for use in a variety of applications in the world of digital communications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description