HCPL-5401#300

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are optoelectronic devices that transfer electrical signals between two circuits by means of light waves. One side of the device consists of an infrared light-emitting diode (LED) and the other side is an integrated chip that has a photosensors, usually a photodiode, mounted in reverse-bias configuration. The HCPL-5401#300 is a logic output optoisolator that is used to electrically isolate two circuits. It can be used in safety-critical applications where high isolation is required. This article will discuss the features, applications, and working principles of the HCPL-5401#300.

Features of HCPL-5401#300

The HCPL-5401#300 is a low-cost optoisolator with a high degree of electrical isolation (10,000 V peak) and good speed performance (150 ns pulse rising time). It features an internal photodiode and a high-power infrared LED. The LED can be driven with either AC or DC current, and it is designed to work with most TTL and CMOS logic outputs.

The HCPL-5401#300 has a low-profile package that is only 1mm tall. It is fully RoHS-compliant and can operate over a wide temperature range (-55 to +125°C). Other features include an open-collector output, low power consumption (1.5 mW), and high noise immunity (50 kV/Us).

Applications

The HCPL-5401#300 is used in a variety of applications, including:

• Factory automation systems,
• Electric power controllers,
• Safety systems in railway and automotive applications,
• Medical devices,
• Security systems,
• Industrial sensors.

The device is also well-suited for use in harsh environmental conditions, such as high-temperature or high-vibration industrial applications.

Working Principle

The HCPL-5401#300 works by using a photosensors to detect the light emitted by the LED. The photosensors will convert light energy into electrical energy. When the LED is illuminated, the reverse-biased photosensor will generate a small current. This current is then amplified to provide the output. The output can then be used to control external devices or systems.

The HCPL-5401#300 provides high noise immunity by using an internal voltage clamp diodes. These diodes will protect the device from high-voltage signals. It also has an internal surge protection diode to provide additional protection against high-voltage surges.

Conclusion

The HCPL-5401#300 optoisolator is a low-cost, low-profile device that provides high electrical isolation and good speed performance. It is designed to work with most TTL and CMOS logic outputs and has an integrated photosensors and LED. The device is well-suited for use in safety-critical applications and harsh environments. Additionally, the HCPL-5401#300 has a number of features that provide high noise immunity and surge protection.

The specific data is subject to PDF, and the above content is for reference