HCPL-5530#200

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HCPL-5530#200 is an opto-isolator, more specifically a transistor and photovoltaic output optocoupler, that is used for transmitting electrical signals between two sections of a system that have to remain electrically isolated from one another. This device contains a high voltage solar cell and a Bipolar Transistor Output, and is used is a wide range of application fields, from automotive construction to industrial automation.

An optocoupler allows the user to isolate two or more electrical circuits without physical contact between them. The device is composed by two main parts, the input, which usually is a photo diode or a light emitting diode (LED), and the output, a transistor, thyristor or a triac. The HCPL-5530#200 consists of a LED and a Bipolar NPNS transistor.

The optocoupler works by introducing light, generated by the LED that drives the side of the circuit, through a light-sensitive barrier, across a physical gap to activate a photo transistor on the other side. Light is converted into electric current, keeping the two sections of the circuit segregated. The output side has higher insulation than the input side. The LED can be driven by voltages going up to 36V.

The advantage of the HCPL-5530#200 optocoupler is usually represented by its speed and its capacity to transfer a wide range of signal levels, amplitudes and types (PWM, Logic level etc…). Its construction provides high insulation resistance: between all pins of the photocoupler side and between the output transistor side and the photocoupler side.

Its output is an NPN transistor designed to be capable of driving loads up to 500mA of current and continuous collector emitter voltage up to 100V. This device is suitable to be used in applications that require interfaces between the low-power control systems, with the power loads of a wide range of current and voltage. It is widely used in the automotive, factory and energy industry. Thanks to its good isolation resistance, it is also suitable for high voltage interface tasks between the input and output side.

The HCPL-5530#200 can be also be used to control appliances like motors, lights, relays and valves. It works similarly as a remote control. By impressing the input signals from the controller board or Automatic Voltage Regulation systems, the NTPD optocoupler will activate the appropriate electronic switch and the device will be operated the way the user instructs.

The HCPL-5530#200 optocoupler can be activated with either normal bipolar wiring or open-drain wiring, making it more flexible for use in applications where the mounting space is limited. Additionally, this device is low cost and easy to install, requires no special maintenance and offers good corrosion and humidity resistance. It is also used in applications that require isolation of the power supply from the logic board (for example, noise interference protection).

All in all, the HCPL-5530#200 optocoupler is an create and reliable solution for the task of isolating different parts of an electric circuit, both for commercial and industrial applications. This device can successfully transmit electrical signals without the need for direct physical contact between the two sides, proving the safe operation of the electrical circuit from noise interference and overvoltage conditions.

The specific data is subject to PDF, and the above content is for reference