HCPL-7520-060E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HCPL-7520-060E is an optocoupler which is widely used in linear amps, instrumentation, buffer amps and operational amplifiers (op-amps). It is a high-speed, high-frequency optocoupler with push-pull output. The device contains a GaAs LED, a silicon PIN detector and a Schottky barrier output transistor in a single IC package. This IC acts as an analog switch and its structure ensures low-power consumption and high-speed performance. The input and output stages of the device are isolated from each other with a gap of 3.2mm. This optocoupler allows logic-level signals to be transmitted between two isolated sections of a circuit. It is suitable for high-speed digital data transmission, high-speed switching applications, analog signal processing and other systems requiring high speed and precision.

The HCPL-7520-060E is composed of a GaAs LED and integrated in an 8-lead wide clear-blue epoxy package. The maximum propagation delay is 1.3ns and the pulse handling capability of the optocoupler is 400mW peak. This optocoupler has a low-noise output of 8mV. The maximum quiescent current is 0.6mA and the peak output current is 80mA with a supply voltage of 5V. The power supply voltage of the photodiode is also 5V and the optical isolation voltage is rated at 4,000Vrms. The LED emitter of this IC is high speed and highly efficient.

The IC offers many advantages including wide signal bandwidth, high isolation voltage, and low propagation delay. The device is galvanically isolated between the input and output and allows 3-state logic operation. It also has a high switching speed, low power consumption and low noise characteristics. The device allows logic-level signals to be transmitted bidirectionally with a high level of signal integrity. It is also very resistant to extreme temperatures and vibrations.

The HCPL-7520-060E optocoupler is used mainly in linear amplifiers, instrumentation, buffer amps and op-amp applications. These applications are used for high speed analog signal transmission, digital signal isolation, high speed switching and timing, power supply isolation and motor control. The device also finds application in industrial control, medical equipment, communications and instrumentation systems. It is also suitable for isolating and buffering high-speed pulse signals and detecting small pulses with low jitter.

The working principle of the HCPL-7520-060E optocoupler is that the photo diode on one side of the device converts the electrical signal into an optical one, which then passes through the gap between the two sides. The other side of the Optocoupler, a photo transistor, then converts the optical signal back into an electrical one. The optocoupler is an ideal choice for applications requiring a high speed and high degree of isolation.

The specific data is subject to PDF, and the above content is for reference