HCPL-7710-500E Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components used to isolate two circuits electrically and optically. They have a photocoupler that consists of an LED (light emitting diode) source and an optical sensor/detector side, isolated by an opaque material. HCPL-7710-500E is a logic output 6-pin optocoupler which is specially designed for industrial applications. It has a high common mode transient immunity and a wide power supply range.

The HCPL-7710-500E optocoupler is used in different application fields, such as motor control, signals conversion, system control, circuit protection, process control, etc. The logic output feature can be used to detect the logic state of a system or a signal. The output is an open-collector transistor and can directly drive an opto-isolator, a transistor input, a mechanical relay or an other suitable device. This optocoupler is also suitable for driving LEDs.

In applications that require high transient immunity or industrial control, the HCPL-7710-500E optocoupler can be used. It has a high speed switching response and a wide operating temperature range. The product has an input-output isolation voltage of 500Vrms and a minimum off-state and isolation capability of 50 kV/µs. The maximum on-state dc current of the optocoupler is 10mA. The forward current if ≤ 5 mA and the reverse current is typically 50µA.

The HCPL-7710-500E optocoupler is designed to be used in combination with an external supply voltage and can be driven with a voltage range of 4 to 16V. The optocoupler can be used in industrial applications, such as motor control, signals conversion, system control, circuit protection, process control, etc. The logic output feature makes it ideal for detecting the logic state of a system or a signal.

The working principle of the HCPL-7710-500E optocoupler is straightforward. The LED side of the optocoupler (input side) uses a voltage input which is used to drive the LED. This voltage is converted to light by the LED. The light is then received by the optical sensor/detector side (Output side) which converts the light signal back to electrical signals. The output signal can then be used to activate the device that needs to be activated.

In conclusion, the HCPL-7710-500E optocoupler can be used in different application fields, mainly motor control, signals conversion, system control, circuit protection, and process control. It has a wide operating range and can be driven by an external supply voltage of 4 to 16V. It has a high common mode transient immunity, a wide power supply range, and a high speed switching response. The logic output feature makes it ideal for detecting the logic state of a system or a signal.

The specific data is subject to PDF, and the above content is for reference