HCPL-263N#300

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Optoisolators - Logic Output, such as the HCPL-263N#300, provide an isolated voltage or current for signal transmission in digital and digital-analog systems. The HCPL-263N#300, as a particular type of logic output optoisolator, serves the purpose of isolating logic input signals from the output circuits. Its application scope is wide and includes computing, industrial, military and automotive applications.

Application Field

The HCPL-263N#300 is suitable for a variety of optocoupler or logic output applications. It may be used to transmit digital and digital logic signals between two end points in various computing and industrial systems. In addition, this optoisolator is suitable for triggering, logic interface, driving and analog data acquisition. It can also be used to control and isolate automotive applications, such as anti-lock braking systems, and Digital Video Disc (DVD) drives for DVD players in consumer electronics.

Moreover, this optoisolator is especially suitable for high-speed digital signal processing applications. It has a very fast rise and fall time and can source a sufficient output current, up to 100mA, which makes it suitable for driving data bus lines. It is also typically used in medical instrumentation, motion control systems, robotics, and missile guidance systems. In addition, the HCPL-263N#300 can even be used to provide signal transfer between two isolated power supplies.

Working Principle

The principle of operation of the HCPL-263N#300 lies in the use of a light emitting diode (LED) as the transmitter and a silicon photodiode as the receiver. The LED is driven by the signal at the input, and this in turn causes the LED to emit light. This light is then detected by the photodiode and converted into an electrical current which is then applied at the output. The electrical current and voltage levels at the output are isolated from the input and therefore provide an electrical isolation between the two points.

In order to further improve the isolation between the input and output, the HCPL-263N#300 utilizes a high voltage dielectric between the LED and photodiode components. This increases the insulation resistance and further isolates the two ends. The input voltage has also been designed to meet requirements of industrial applications between 24VDC and 72VDC.

In addition, the HCPL-263N#300 has also been designed to meet various requirements such as minimum input current, maximum collector voltage, and effective response time. It has a very high operating temperature range from -40°C to +85°C. This makes it suitable for a variety of applications in industrial and computing devices.

Conclusion

The HCPL-263N#300 is a logic output optoisolator with a wide range of applications. It is designed to provide an electrical isolation between digital or analog input signals and output circuits. Its features include a very fast rise and fall time, a high voltage dielectric between the LED and photodiode, and a wide operating temperature range. These features as well as other design considerations enable the HCPL-263N#300 to be used in a variety of computing, industrial, military and consumer applications.

The specific data is subject to PDF, and the above content is for reference