HD60125KT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid state relays (SSRs) are solid-state electrical switches used to control electrical devices such as motors, appliances, lighting, and heating elements. SSRs use low-voltage control signals to switch high-voltage currents, providing numerous advantages over mechanical relays. One example of an SSR is the HD60125KT model. This device is able to switch voltages of up to 250 V at 15 A.

Application field

The HD60125KT is an ideal choice for controlling varying heating and cooling applications, such as refrigerated display cases, under-floor heating systems, and automotive cooling systems. It can also be used in industrial processes that involve controlling or monitoring variable loads such as pumps, blowers, motors, and solenoids. Furthermore, the HD60125KT can be used for lighting control in commercial and residential applications.

Working principle

Unlike traditional mechanical relays, which use physical contact to switch electricity, the HD60125KT uses a semiconductor device called a thyristor. A thyristor is an electronic switch that is triggered by a voltage or current signal. When triggered, the thyristor switches to an “on” state, allowing current to flow through the device. The thyristor remains in that state until the current or voltage goes below a certain level, at which point it switches “off.”

The HD60125KT’s control circuit is triggered by a low-voltage control signal, which is typically between 3 and 32 V. This signal is amplified by the SSR’s internal circuitry, which then activates the thyristor. This causes the thyristor to switch on and allows current to flow through the SSR, thus powering the connected load.

The HD60125KT also utilizes zero-cross detection technology, which helps to protect the connected load from power surges. This technology monitors the power source’s voltage level and ensures that the thyristor is only switched on when the power source is at or near 0 V. This helps to minimize the risk of arcing and potential electrical arcs caused by sudden voltage spikes.

The specific data is subject to PDF, and the above content is for reference