HE751A0510

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Reed relays are useful for many applications that need electrical contact control over a remote location, or that require low power operation. The HE751A0510 is one such device and its application field and working principles are of great importance to understand when designing a system around this device.

The HE751A0510 reed relay is a single-pole, double-throw (SPDT) device with a normally open contact between the two terminals and a normally closed contact between the two terminals. It is a latching device which will remain in its most recently activated state until consciously reset or switched. This makes them well suited for low power applications. The relay has a voltage rating of 16VDC (20VAC) with an operating current of 10mA.

Due to their latching action, reed relays are suitable for use in memory or latch circuits. They are also used in multiplexing and signal switching applications, in which a number of separate signals are combined into one or more higher capacity signals, or vice versa. In these applications, the relays are often used to couple signals from the multiplexed signals to one or more higher capacity signals for processing. They are also commonly used in optoelectronic and remote switch control applications.

The working principle of the HE751A0510 reed relay is simple and efficient. The SPDT contact will open with a small current applied across the two electrical contacts. When the current is removed, the contact returns to its closed position. This is done by using a permanent magnet to position the contact, allowing for efficient contact control with minimal power requirements. The magnetic field created by the permanent magnet attracts the two contacts together, which in turn causes the current to flow. Once the current stops, the contact then returns to its default, normally closed position.

The HE751A0510 reed relay is also relatively simple to integrate into a circuit. The contacts are connected to a power supply and the SPDT contact is then connected to a control circuit or module. Connecting the relay’s two electrical contacts to the control circuit allows the two sets of contacts to be controlled individually, with a minimum current required to change the state of the contact. By using the voltage supplied to the contacts, the current is applied and the contact is opened or closed, respectively.

In summary, the HE751A0510 reed relay is an efficient and reliable control device, suitable for many low power and remote applications. Its low power consumption, SPDT contact, and latching action make it an excellent choice for memory or latch circuits, signal switching, and many other applications. Its simple design and operation make it easy to integrate into a circuit and provide reliable electrical contact control.

The specific data is subject to PDF, and the above content is for reference