HEC4093BT,112

Current - Output High, Low:	3.4mA, 3.4mA
Base Part Number:	4093
Package / Case:	14-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	14-SO
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Max Propagation Delay @ V, Max CL:	60ns @ 15V, 50pF
Logic Level - High:	3.5 V ~ 11 V
Logic Level - Low:	1.5 V ~ 4 V
Series:	4000B
Current - Quiescent (Max):	1µA
Voltage - Supply:	3 V ~ 15 V
Features:	Schmitt Trigger
Number of Inputs:	2
Number of Circuits:	4
Logic Type:	NAND Gate
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Gates and Inverters

Logic gates and inverters are essential components of circuits used in a variety of applications. The HEC4093BT,112 is a specific type of inverters that has been designed for applications that require low voltage and low current devices. This particular inverter is an integrated circuit (IC) chip that is typically used in logic circuits, such as those used for logic level shifting and logic level conversion. The working principle of the HEC4093BT,112 is discussed below, followed by a description of the various applications that the inventer can be used for. The HEC4093BT,112 is built on a CMOS technology. This type of chip is known for providing low voltage and low power consumption, which makes it ideal for logic circuits that require minimal power. The chip is composed of a logic input, a logic output, and an output enable/disable pin. The logic input is used to provide the signal that is to be inverted, while the logic output is the signal that is produced after the input has been inverted. The output enable/disable pin allows the user to control whether the output is enabled or disabled. When a signal is applied to the logic input of the HEC4093BT,112, the chip will compare the input to an internally generated reference signal. If the signal applied to the logic input is higher than the reference signal, the output will be inverted. If the signal applied to the logic input is lower than the reference signal, the output will remain unchanged. The HEC4093BT,112 can be used in a variety of applications where low voltage is required and minimal power consumption is desired. One of the most common uses of this type of inverter is in logic level shifting. Logic level shifting is used to switch between multiple logic levels in order to create higher speed operations or to match different logic levels between modules. Another common use of the HEC4093BT,112 is in logic level conversion. This type of circuit is used to convert the logic levels between two different logic families. For example, if a logic circuit is to be connected to a different logic family, a logic level conversion circuit is needed to match the two logic families. This type of inverter can also be used in analog-to-digital conversion, or ADCs. The ADC is used to convert a continuous waveform into a digital format. The HEC4093BT,112 can be used in conjunction with an ADC converter to provide a low voltage and low power solution for converting analog signals into digital signals. In addition to its use in logic level shifting, logic level conversion, and ADCs, the HEC4093BT,112 can also be used in timing circuits and pulse encoders. Timing circuits are used to generate periodic pulses, while pulse encoders are used to convert pulsed signals into digital codes that can be used by computers. It is also possible to use the HEC4093BT,112 in microcontroller applications. This type of inverter can be used to invert the logic levels of microcontroller signals in order to create chips with different logic levels. This allows the user to create microcontroller-based systems that are capable of operating at a faster rate than is possible with standard logic levels. The HEC4093BT,112 is a versatile component that can be used in a variety of logic circuits and applications. Its low voltage and low power consumption requirements make it ideal for applications that need to save on power. The chip is also easy to use and provides consistent results, making it an ideal choice for a variety of logic circuit needs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description