HEF40193BT,652

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HEF40193BT,652 is a logic based integrated circuit that belongs to the logic – counters, dividers families. It is a 16-pin logic chip that contains many useful functions that allow it to be used in a variety of applications.

The HEF40193BT,652 is a dual BCD decade counter, meaning that it can count the digits of a binary code in the range of 0 to 9. It performs a variety of logical operations such as incrementing, resetting and carry-over, depending on the inputs and mode chosen. It is widely used in counting and sequencing circuit applications, such as for motor control, clock timing and digital displays.

The counter also has a built in logic comparator, which can compare two different bit patterns and output a signal corresponding to the result. This makes it useful in signal processing applications, where certain signal patterns need to be filtered out. It can also be used in systems that require signal filtering, such as noise cancelling headphones.

The HEF40193BT,652 requires an external clock signal for proper operation. This external clock can be derived from an internal oscillator, an external oscillator or an external signal source, such as a microcontroller. The internal clock can be programmed by connecting the appropriate configuration pins. The counter also has two clock enable pins, which allow external control over the clock signal, allowing the counter to be paused when necessary.

The counter can operate in two different modes – divide-by-N and divide-by-2N. In divide-by-N mode, the counter counts up to the number of steps specified by the A,B and C inputs and then carries over the count to the next higher level. In Divide-by-2N mode, the counter counts up to twice the number of steps specified by the A,B and C inputs and then carries over the count to the next higher level. The divide-by-N and Divide-by-2N modes can be toggled by the duty cycle input.

The outputs of the counter can also be programmed by connecting the appropriate configuration pins. The outputs can be programmed to be either digital (high or low) or open-drain (high-z) type. The outputs can be used to drive external loads such as LEDs, relays, transistors, capacitors and other logic components.

The HEF40193BT,652 is a versatile and powerful integrated circuit that can be used in a wide range of applications. Its

The specific data is subject to PDF, and the above content is for reference