HI1-0506-5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface - Analog Switches, Multiplexers, Demultiplexers

The HI1-0506-5 is a low voltage, high performance silicon monolithic integrated circuit used as an analog switch multiplexer/demultiplexer. It is designed to switch and control the flow of analog signals between multiple input/output sources and destinations. The circuit has a wide range of applications in portable electronics and embedded systems, for example high sampling A/D and D/A converters and instrumentation pre-amps.

HI1-0506-5 is configured as an analog switching multiplexer with an integrated input impedance of 5kΩ, a maximum operating voltage of 3.5V, and an output impedance of 10kΩ. Additionally, the device comes with an on-board RFI filter and an extended temperature range of -30C to +85C. The integrated circuit contains three I/Os which can be used to connect two sources and one destination.

The HI1-0506-5 is commonly used as an analog multiplexer/demultiplexer, switching and controlling which analog signals are routed between multiple sources and destinations. The HI1-0506-5 has several common configurations including single-pole, dual-pole and triple-pole switches. Each switch can be independently enabled and disabled. This allows the user to select which channels are enabled and control the signal flow between input and output sources.

At the core of the HI1-0506-5 is a bidirectional switch which is controlled by an on-board logic block. This logic block allows not only for the direction of the signals, but also for the specific setting of the impedance of the switch, as well as the amount of current that is passed through the switch. The logic block is programmed by the user via input pins on the device.

HI1-0506-5 also contains an integrated analog comparator, which monitors the signal level of the inputted signal and is used to detect the presence of a signal on one or more channels, controlling the flow of signals accordingly. The analog comparator is programmable, allowing the user to select the level at which the signal is considered active. This signal can then be used by the logic block to determine which channels to enable and disable, in order to optimize the signal flow.

The HI1-0506-5 is thus a versatile and powerful analog multiplexer/demultiplexer, allowing users to control the signal flow between multiple sources and destinations. The integrated logic block and analog comparator provide users with the ability to determine which channels are active, providing a comprehensive and efficient system for controlling analog signals.

The specific data is subject to PDF, and the above content is for reference