HI1-0509A-5

Switch Time (Ton, Toff) (Max):	300ns, 300ns (Typ)
Base Part Number:	HI-509
Supplier Device Package:	16-CERDIP
Package / Case:	16-CDIP (0.300", 7.62mm)
Operating Temperature:	0°C ~ 75°C (TA)
Crosstalk:	--
Current - Leakage (IS(off)) (Max):	30pA (Typ)
Channel Capacitance (CS(off), CD(off)):	10pF, 12pF
Charge Injection:	--
-3db Bandwidth:	--
Series:	--
Voltage - Supply, Dual (V±):	±15V
Voltage - Supply, Single (V+):	--
Channel-to-Channel Matching (ΔRon):	--
On-State Resistance (Max):	1.8 kOhm
Number of Circuits:	2
Multiplexer/Demultiplexer Circuit:	4:1
Switch Circuit:	SP4T
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The HI1-0509A-5 is an interface-analog device designed to switch between input signals, multiplex them, and then demultiplex to the desired outputs. It can be used in a variety of different applications, including but not limited to, data collection and processing, audio mixing and mixing applications, signal routing, and any other application requiring multiplexing and/or demultiplexing. This article will discuss the application field and working principle of the HI1-0509A-5.

Application Field

The HI1-0509A-5 is an integrated device that combines multiple functions, allowing for a wide range of applications. As mentioned before, the HI1-0509A-5 can be used in data collection and processing applications. The wide range of input and output signals makes it an ideal choice for applications dealing with the collection and analysis of large amounts of information. Furthermore, the HI1-0509A-5 can also be used for audio mixing and mixing applications. It can mix multiple audio signals together and demultiplex them to the desired output. Another possible application of the HI1-0509A-5 is signal routing. It can be used to switch between multiple incoming signals and route them to the appropriate destination. Finally, the HI1-0509A-5 can be used in any other application requiring multiplexing and/or demultiplexing.

Working Principle

The HI1-0509A-5 is an integrated device that uses a variety of components such as multiplexers, switches, and demultiplexers to perform its tasks. First, the HI1-0509A-5 accepts multiple input signals and then uses a multiplexer to switch between them. The multiplexer combines all of the input signals into one signal, Analog Signal A, and then switches from signal to signal based on the control signals. After the input signal is switched, the signal is sent to a demultiplexer which separates the signal into two outputs, Analog Signal A and DAC. The DAC output is then used to control the multiplexer, allowing for smooth switching. Finally, the Analog Signal A is sent back to the multiplexer allowing for further control. The HI1-0509A-5 accepts multiple input signals, switches between them, and then demultiplexes the signal to the desired outputs.

Conclusion

The HI1-0509A-5 is an interface-analog device that can switch between input signals, multiplex them, and then demultiplex them to the desired outputs. It can be used in a variety of different applications, including data collection and processing, audio mixing and mixing applications, signal routing, and any other application requiring multiplexing and/or demultiplexing. The HI1-0509A-5 uses a variety of components such as multiplexers, switches, and demultiplexers to perform its tasks. It accepts multiple input signals, switches between them, and then demultiplexes the signal to the desired outputs.

The specific data is subject to PDF, and the above content is for reference