HI3-0506-5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog switches provide a mechanism of routing signals between two points. They are used in many application fields, including audio and instrumentation, test and measurement, radio-frequency (RF) systems, power electronics and radar systems. The HI3-0506-5 analog switch is a representative example of one analog switch type.

The HI3-0506-5 analog switch is a 3-bit configurable single-pole double-throw (SPDT) switch. It has an analog signal range of +/- 12V, meaning it can handle signals with an amplitude up to 12 volts. The HI3-0506-5 operates in two modes, which can be configured by an external select pin: the HI3-0506-5 can be used as a simple analog switch, or as a multiplexer-demultiplexer. When operated as an analog switch, it switches between two different analog signals; when operated as a multiplexer-demultiplexer, it switches between a group of analog signals.

In the analog switch mode, the HI3-0506-5 requires the following inputs: plus voltage (VDD), minus voltage (VSS), select pin (MuxSel), logic input (Xn), analog input A (INA), and analog input B (INB). Logic input Xn is used to select between analog inputs A and B; when Xn is asserted, input A is selected, and when Xn is de-asserted, input B is selected. The HI3-0506-5 has two outputs, Y1 and Y2. When the select pin MuxSel is de-asserted, both outputs will be equal to the input that is selected by the logic input Xn. When the MuxSel pin is asserted, both outputs will be the same, equal to the input that is selected by the logic input.

In the multiplexer-demultiplexer mode, the HI3-0506-5 is used to switch between a group of analog signals. The HI3-0506-5 requires the following additional inputs: multiplexer address pins (X0, X1, X2) and analog inputs 0-7 (INA0, INA1, INA2, INA3, INB0, INB1, INB2, INB3). The multiplexer address pins X0, X1 and X2 are used to select which of the analog inputs is connected to the outputs. When all three multiplexer address pins are de-asserted, output Y1 will be equal to input INA0, and output Y2 will be equal to input INB0. When bit X0 is asserted, output Y1 will be equal to input INA1, and output Y2 will be equal to input INB1. In this way, the HI3-0506-5 can act as a multiplexer, allowing a group of analog signals to be switched between two output signals.

The HI3-0506-5 is a versatile switch that is used in a variety of applications. It is particularly useful in RF systems, where it can be used to switch between multiple antennas; in power electronics, where it can be used to switch between multiple power supplies; in avionics, where it can be used to switch between multiple instruments; and in radar systems, where it can be used to switch between multiple targets. It can also be used as an analog switch in audio and instrumentation systems, test and measurement systems and other applications.

The HI3-0506-5 is a highly versatile analog switch that can be used in a variety of applications. It can be used either as an analog switch, switching between two signals, or as a multiplexer-demultiplexer, switching between a group of analog signals. Its versatility makes it a useful tool for RF, power electronics, avionics, radar and other systems.

The specific data is subject to PDF, and the above content is for reference