HIN208CB

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	4/4
Duplex:	Full
Receiver Hysteresis:	500mV
Data Rate:	120Kbps
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	24-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	24-SOIC
Base Part Number:	HIN208

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HIN208CB is a part of the Interface-Drivers, Receivers, Transceivers family. It operates as a low voltage transceiver, controlling transfer of data between logic levels of a system within a voltage range of 0.9V to 5.5V.The HIN208CB has a number of features which enable it to be utilised in a variety of applications. On its primary level, the HIN208CB allows for bidirectional transfer of digital signals from one system to another with a single board, without the need for manual configuration.The HIN208CB supports many different physical communication protocols, from low-voltage transfer (LVO) to fast Transfer of digital data. The part is equipped with 10mA of current drive (sink) current for 5V systems, and is capable of taking up to 25mA for a 12V system. It is also capable of RS-485/EIA-485 compliance modes where it meets both 4-wire and 2-wire bus operation. Lastly, it is compatible with both 3.3V and 5V logic levels, allowing it to be used in different systems. To understand how the HIN208CB works, we need to first understand what an interface is and how information is transferred between two systems. An interface is a point at which two systems or components can interact or exchange information between each other and a transceiver is a device which transmits and receives analog or digital signals. A transceiver acts as an intermediary between the two systems, allowing information to be transferred.The HIN208CB is designed to mechanically and electrically connect two sets of logic devices, eliminating the need for additional hardware or complex programming. It works by communicating with both sets of logic devices using digital logic commands which activate certain internal logic elements. These logic elements are then used to switch between the two systems, allowing for a bidirectional transfer of data. For example, when a digital output signal is received from one of the logic systems, the HIN208CB transceiver will convert the analog signals to digital signals. This process is done by converting the low level input signals to a higher digital output level that is compatible with the system’s logic levels. This is done by the part’s comparator circuit which the HIN208CB uses to compare the input signal to a reference voltage and then output a logic level which is compatible with the logic system it is connected to. The HIN208CB also has a data rate limiting feature which allows for the adjustment of the data rates that are transferred between the two logic systems. This feature is used to ensure that data is not transferred faster than the logic system can handle. By adjusting the data rate limit, the part is able to ensure that the data is sent at optimal speeds and that data integrity is maintained. The HIN208CB is a handy part to have in any system that needs to transfer data, as it is a low voltage, cost-effective transceiver that can be used to bridge the gap between two logic systems. Its support of a variety of communication protocols ensures that it can be used in different systems, and its ability to both transmit and receive data to and from any logic system is a great benefit. Overall, the HIN208CB has a variety of features which make it a useful part for many applications where bidirectional data transfer between two systems is needed. from low voltage transfer to fast data transmission, it is an ideal solution for any system that needs to transfer data.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description