HMA121CR1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HMA121CR1 is a type of optoisolator in the Transistor, Photovoltaic Output family. It is a digital optoisolator with an LED driver output tailored for driving high-current LEDs which is heat sink mountable for convenience and efficiency.

Optoisolators are components that provide electrical isolation between a signal input and output for protection and noise-reduction purposes. They create an electrical barrier between input and output, using an optoelectronic device to transmit a signal. This type of optoisolator, Transistor, Photovoltaic Output, has a transistor output coupled to a photovoltaic infrared diode. When the input is triggered, the infrared diode conducts and the transistor is turned on, switching the output.

As such, the HMA121CR1 is designed to protect low-level logic circuits from dangerous voltage transients which can damage the system. It can be used in a wide variety of applications including automotive, medical, industrial, and consumer electronics. It offers high speed response, high input/output isolation, and low power applications. Additionally, it has minimized capacitive loads due to its photovoltaic core design.

The HMA121CR1 works on the principle of an LED driver opto-isolator. The device includes an LED driver which is connected to the control side of the unit, with an LED connected to the output side. The output voltage is determined by the voltage drop between the control and output part of the circuit, with the control side having a control voltage and the output side having an LED voltage. When the control voltage drops below the LED voltage, current begins to flow through the LED, activating the output.

The LED driver can be used to provide both an active and passive LED drive. Active LED drive allows for a power source to be used to connect the control and output side of the circuit. This power source then determines the level of the LED drive voltage, thus controlling the output current level of the device. Passive LED drive does not require a power source, and instead the LED voltage is determined by the current flow in the control-side circuit.

The HMA121CR1 offers high noise immunity because of its superior optical isolation, low power consumption, and wide operating temperature range. It has a wide voltage input range up to 24V and can switch load currents up to 1A. It is designed to be resilient and withstand electrostatic discharge up to 8kV and is RoHS certified.

Using the HMA121CR1 can enable systems to work more reliably and effeciently. It is suited for many different applications including I/O interfaces, displays, line interface circuits, and opto-couplers. It can be used in high speed switching circuits and motor control applications, such as controlling the speed of an electric motor, and is compatible with most microcontroller systems. It can provide improved system protection while reducing the amount of noise in the system.

The specific data is subject to PDF, and the above content is for reference