HMA121CR4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output, are devices that use light to provide electrical isolation between two circuits. They are mostly used in applications needing to protect one circuit from interference and damage caused by high voltage or currents in other circuits. The HMA121CR4 is an opto-isolator designed to be compatible with customer circuits. The HMA121CR4 offers an isolation voltage of 4,000 VAC rms and a wide temperature range. It is a four-channel, phototransistor output optoisolator, with a CTR (current transfer ratio) of up to 550% min.

The HMA121CR4 is composed of two parts: the input side and the output side. The input side is composed of a gallium arsenide infra-red (GaAs-IR) LED which is optically coupled to the output side which is composed of a phototransistor. The isolation between these two sides is provided by an optically transparent barrier. When the GaAs-IR LED is powered on, it will emit light which will be detected by the phototransistor on the other side. This will cause the phototransistor to switch on and supply the required current to the output side.

The HMA121CR4 has many applications. It can be used in industrial, commercial and residential applications. An example of a residential application would be the installation of a smoke detector with the HMA121CR4 optoisolator. In this type of application, the input side of the optoisolator would be connected to a circuit powered by the mains, while the output side would be connected to a smoke detector. If the smoke detector detects smoke, it will switch on and the HMA121CR4 will use the light to trigger the output side circuit, activating a buzzer or other alarm. This provides electrical isolation between the mains powered circuit and the smoke detector circuit, thus preventing any interference or damage.

The HMA121CR4 can also be used in industrial systems such as automated conveyor lines. Here, the input side would be connected to a controller powered by the mains and the output side would be connected to a relay. The relay would control the conveyor line motor, allowing it to be turned on and off. The relay will be triggered when the controller sends a signal which is detected by the input side LED and then passed on to the output side phototransistor. Again, this provides electrical isolation between the mains powered controller and the motor, and prevents any interference or damage from occurring.

In summary, the HMA121CR4 optoisolator is an excellent choice for applications requiring electrical isolation between two circuits. It is a four-channel, phototransistor output optoisolator, which offers an isolation voltage of 4,000 VAC rms and a wide temperature range. It can be used in a variety of industrial, commercial and residential applications. By using the HMA121CR4, customers can ensure that their circuits are protected against interference or damage caused by high voltage or currents in other circuits.

The specific data is subject to PDF, and the above content is for reference