HMC650-SX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators represent a common type of electronic circuit used to reduce the strength of an electrical signal. One model of an attenuator is the HMC650-SX, which is a 2 watt, 1 dB, SMA-connect male to female, 4-way, 0.1 dB to 20 dB step attenuator. The HMC650-SX is used in a variety of applications, ranging from wireless communication systems, antenna tuning, RF research, and satellite broadcasting systems.

The HMC650-SX attenuator is composed of a dielectric substrate and copper patterns formed onto it. It has a minimum insertion loss of 0.5 dB and a maximum switching speed of 1000 MHz. Additionally, it has a high isolation of more than 40 dB. The center conductor is gold plated for high reliability. The HMC650-SX is manufactured in compliance with surface mount technology and is RoHS compliant.

The working principle for the HMC650-SX attenuator is defined as a trans-resistance amplifier. This model uses RF resistors to control the electrical power line of the RF signal. These resistors are connected in series with the input and output line. When a voltage or current is applied to the input port, the resistors limit the amount of power that is transmitted to the output port. Thus, the amplitude of the signal is reduced at the output port.

The attenuation of the signal by the HMC650-SX is proportional to the value of the input signal, thus either increasing or decreasing the signal strength. Depending on the application, the HMC650-SX can be configured to operate at any frequency between 5 and 1000 MHz, making it ideal for a variety of applications. It is also designed to maintain a consistent level of signal attenuation over the entire frequency range.

The HMC650-SX attenuator is ideal for a variety of applications as it provides a consistent level of signal reduction over a wide range of frequencies. It is well-suited for use in wireless communication systems, antenna tuning, RF research, and satellite broadcasting systems due to its high isolation, low insertion loss, and fast switching speed. Additionally, its compliance with surface mount technology and RoHS mandate allows for its use in a wide variety of settings. The HMC650-SX is a reliable and effective tool and is ideal for use in a number of technological applications.

The specific data is subject to PDF, and the above content is for reference