HPA00088I-14DR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HPA00088I-14DR amplifiers are part of the growing field of linear amplifiers, which belong to the larger category of instrumentation, OP amplifiers, and buffer amplifiers. Linear amplifiers are used to increase the level of an electrical signal without changing its waveform, while instrumentation and OP amplifiers are used to produce very low-level signals with highly accurate accuracy. Buffer amplifiers are used to maintain stability when introducing external voltages or loading to a signal.

The HPA00088I-14DR is a high-precision linear amplifier that is designed for low-power applications. Its operating frequency range is up to 500MHz, and its power requirement is from 3.3V and 5.5V. The input power range is from 1Vp-p to 10Vp-p, and the output power range is from 2Vp-p to 30Vp-p. Its linearity is better than 0.25%, and its dynamic range is better than 120dB. It has low distortion, low noise, and low group delay. The operating temperature range is from -20°C to +70°C.

The HPA00088I-14DR is capable of producing high-quality amplified signals with minimal distortion. The combination of its wide frequency range and wide dynamic range makes it suitable for use in a wide range of applications. It can be used in a variety of scenarios, including medical and scientific fields, where it is able to accurately measure small signals over a wide range of frequencies. Additionally, it can be used in audio applications, such as dynamic range optimization, and its high linearity ensures accurate signal transfer.

The working principle of the HPA00088I-14DR is based on an Operational Amplifier (Op Amp). This type of circuit is commonly used for amplifying signals, as it is able to amplify the signal with minimal distortion of the original waveform. The Op Amp is connected in a closed loop, with the output of the amplifier being fed back to the input. The feedback allows the circuit to compare the input signal to the output signal, and adjust the gain or output level accordingly. The gain of the circuit can be adjusted by adjusting the properties of the feedback loop, such as the capacitance or resistance.

In addition to its primary function of amplifying signals, the HPA00088I-14DR is also capable of providing isolation and protection from external electromagnetic interference (EMI). This is accomplished by utilizing a low-pass filter and a high-pass filter. The low-pass filter acts to reduce the amplitude of any frequencies above a given threshold, while the high-pass filter allows only frequencies below the threshold to pass. This ensures that the amplifier is not affected by outside noise, resulting in a consistent, clean signal.

The HPA00088I-14DR is an excellent choice for amplifying low-power signals, as its wide frequency and dynamic range make it suitable for a variety of applications. Its high linearity, low distortion, and good EMI protection ensure that the signal remains clean, consistent, and accurate. Its op-amp-based design is capable of producing amplified signals with minimal distortion, allowing for a wide range of signal-processing applications.

The specific data is subject to PDF, and the above content is for reference