HPL0603-3N3 Inductors, Coils, Chokes

Series:	HPL
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Type:	Thin Film
Material - Core:	--
Inductance:	3.3nH
Tolerance:	±0.2nH
Current Rating:	310mA
Current - Saturation:	--
Shielding:	Unshielded
DC Resistance (DCR):	660 mOhm Max
Q @ Freq:	10 @ 300MHz
Frequency - Self Resonant:	7GHz
Ratings:	--
Operating Temperature:	--
Inductance Frequency - Test:	500MHz
Mounting Type:	Surface Mount
Package / Case:	0201 (0603 Metric)
Supplier Device Package:	0201 (0603 Metric)
Size / Dimension:	0.024" L x 0.012" W (0.60mm x 0.30mm)
Height - Seated (Max):	0.013" (0.33mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:
Fixed Inductors are widely used in a variety of applications, ranging from consumer to industrial to military. The HPL0603-3N3 is an inductor manufactured by Murata. It is a fixed inductor, which is sometimes referred to as an RF inductor. It is a small and low cost, axial-type inductor with a high Q factor. In this article we will discuss the application fields and working principles of the HPL0603-3N3 inductor.

Application Fields:
The HPL0603-3N3 inductor is commonly used in RF circuits, primarily because of its high-Q factor and small size. It can be used in a wide range of frequencies, from DC to 1.5GHz. This makes it suitable for use in mobile phones, GPS systems, and various other electronic equipment. It is also used in impedance matching circuits for RF amplifiers and can be used in filters and antenna tuning circuits. It is also a good choice for voltage follower circuits and power supplies.

Working Principle:
An inductor is an electronic device that stores energy in the form of a magnetic field. The most common type of inductor is a coil of wire. When a current is passed through the coil it generates a magnetic field, which then induces a voltage in the coil. This voltage is proportional to the rate of change of the current and is reversed when the current is reversed. The magnitude of the voltage depends on the rate of change of the current, the inductance of the coil and the size of the coil. The inductance of the coil is directly proportional to the number of turns on the coil and its size. The HPL0603-3N3 inductor has an inductance of 3.3nH, which gives it a maximum current of 470mA.

Conclusion:
The HPL0603-3N3 is a popular inductor in many RF circuits due to its small size and high Q factor. It can be used for a variety of circuits from matching impedances in amplifiers to antenna tuning. Its inductance of 3.3nH allows it to handle a maximum current of 470mA. If you need an inductor for an RF circuit, then the HPL0603-3N3 should be a great choice.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description