HS247180

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HS247180 is a single-phase bridge rectifier that is widely used in power conversion and AC-to-DC applications. This rectifier is made of a silicon die that supports both sides of the AC current waveform and prevents it from flowing directly through the system.

The HS247180 is composed of four diodes connected together in a Diode Bridge configuration. The circuit’s function is to convert a sinusoidal AC waveform into a unidirectional DC waveform. This process of waveform conversion can be used to transfer power between circuits or to perform reverse polarity protection of sensitive components.

The HS247180 bridge rectifier is primarily used in AC-to-DC power supplies, rectifiers, UPS systems and AC motor drives. It can also be used in snubber circuits, voltage controllers, and half-wave rectifiers. Additionally, this device can be used in power converters, electronic ballasts and pulse generators for lighting applications.

The bridge rectifier is based on the power converter principle. It utilizes forward bias and reverse bias from a single source to generate a frequency controlled output. When AC current passes through the bridge rectifier, the diodes conduct current during the positive half of the waveform, and block current during the negative half of the waveform. The resulting DC voltage is the same as the positive DC voltage supplied by the AC source.

In order to understand the working principle of the HS247180 rectifier, it is important to understand diodes and their operating parameters. Diodes are formed by two terminals: the anode, which is the positive terminal, and the cathode, which is the negative terminal. When forward bias is applied to the terminals, the diode will conduct current and produce a voltage drop across its terminals. On the other hand, when a reverse bias is applied to the terminals, the diode will block any current through it and no voltage drop will be seen over its terminals.

The HS247180 bridge rectifier is composed of four diodes connected in a bridge rectifier configuration as illustrated in the figure below. As the AC source cycles, each individual diode is forward biased for half of the waveform and reverse biased for the other half. As the diodes alternate between conducting and blocking, a ripple voltage appears across the output of the rectifier. However, since the ripple voltage is in phase with the input current, the average DC voltage is the same as the input voltage.

The bridge rectifier also provides a great advantage to AC power supply because it eliminates any reverse current in the circuit, thus providing protection against any sudden voltage changes. The input AC current is rectified, meaning it is forced to only pass through the load in the same direction, thus reducing power losses. Additionally, the bridge rectifier can be used to provide a steady DC voltage and to protect sensitive components from voltage spikes.

In conclusion, the HS247180 is a single-phase bridge rectifier that is widely used in AC-to-DC power supplies and other AC electronics applications. It is composed of four diodes connected in a bridge rectifier configuration, which is used to convert an AC waveform into a DC waveform. The four diodes alternate between conducting and blocking, thus creating a ripple voltage but also providing a steady DC voltage. This diode bridge rectifier provides advantages such as protection against reverse current and voltage spikes, as well as reduction in power losses.

The specific data is subject to PDF, and the above content is for reference