HSCDANN150PG2A5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure sensors and transducers are used in a wide variety of industries and applications. They measure the pressure of a given atmosphere or medium, and provide a variety of outputs for use with other instruments and devices.

The HSCDANN150PG2A5 is a pressure sensor and transducer that is specifically designed for HVAC (Heating, Ventilation, and Air Conditioning) applications. It uses a variable capacitance principle to measure the pressure of the atmosphere or medium, and can be used to measure differential, gauge, and absolute pressures.

The HSCDANN150PG2A5 is designed as a stand-alone module, and the sensor is made up of a number of components: a sensing element, a dielectric, and a housing. The sensing element is made of a piezoelectric material, which can sense changes in pressure due to mechanical stresses applied to it. The dielectric is a material that has electrical insulating properties, allowing the manipulation of the voltage applied to the sensing element. The housing is a metal casing that houses the sensitive components of the sensor and protects them from physical damage or environmental influences.

The HSCDANN150PG2A5 works by using two methods of sensing. The first method is a differential sensing measuring method, which allows for the direct measurement of pressure differences between two points in a medium. This sensing is done by using two capacitors placed in the same environment, but exposed to different pressures. A voltage is applied to both, and the changes in the capacitance are measured using a differential amplifier. This method is used for differential pressure measurements, as it provides an accurate reading of the pressure difference between two points in the atmosphere or medium.

The second method is a gauge pressure sensing measurement method. Here, a single capacitor is used, and this is exposed to the atmosphere or medium. This reading is compared to a reference pressure to calculate the gauge pressure. This method is best suited for systems where the pressure at one point is being measured, and the pressure difference between two points is not important. This type of measurement is usually used to measure the pressure of a gas or liquid in a pipe or container.

The HSCDANN150PG2A5 is able to measure pressure over a wide range, from 500 mbar to 5 bar. The accuracy of the measurements is 0.5% of the range, and the pressure resolution is 0.075 mbar. The output of the HSCDANN150PG2A5 is either a voltage or a current signal, depending on the configuration. It has a fast response time and a low power consumption of only 5 mA.

The HSCDANN150PG2A5 is suitable for applications such as HVAC, automotive, industrial process control, and medical applications. It is highly reliable and has a long service life. Its robust design and reliable performance make it a great choice for any pressure measurement application.

The specific data is subject to PDF, and the above content is for reference