HSM825G/TR13

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	25V
Current - Average Rectified (Io):	8A
Voltage - Forward (Vf) (Max) @ If:	620mV @ 8A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	250µA @ 25V
Capacitance @ Vr, F:	--
Mounting Type:	Surface Mount
Package / Case:	DO-215AB, SMC Gull Wing
Supplier Device Package:	DO-215AB
Operating Temperature - Junction:	-55°C ~ 175°C
Base Part Number:	HSM825

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

：

HSM825G/TR13 Application Field and Working Principle

Introduction

The HSM825G/TR13 is a diode - rectifier - single type device produced by Motorola. The diode is a semiconductor device normally used in electronic circuits as a rectifier, switch, or signal modulator/demodulator. It is a low-power, low-voltage single-phase rectifier that is used to convert AC voltage to DC voltage.

Application Field

The HSM825G/TR13 is commonly used in various electronic applications, such as motor drives, lighting, home appliances, power supplies, and more. The diode has a wide range of applications, ranging from low-voltage to high-voltage, AC to DC rectification, and single terminal to dual terminal operation.

The diode can be used for a variety of tasks, including rectifying the direct current (DC) output of a power supply, providing “ON / OFF” switch control, powering LED displays and indicators, controlling oscillators or timing circuits, and protecting against voltage surges. It is also suitable for general electronic applications, such as signal processing and signal modulation/ demodulation.

Working Principle

The HSM825G/TR13 is a PN junction diode. This means that it consists of an N-type semiconductor material (electrons are the majority carrier) and a P-type material (holes are the majority carrier), connected together. When the anode (the positive terminal) is connected to the N-type material and the cathode (the negative terminal) is connected to the P-type material, a flow of electrons from the anode to the cathode occurs.

The flow of electrons is effectively a flow of current, and this is referred to as “forward bias”. At the same time, a “reverse bias” is generated by connecting the anode to the P-type material and the cathode to the N-type material. In this case, no current will flow. Thus, the diode acts as a one-way valve, allowing current to flow in one direction only.

When an AC voltage is applied to the diode, it will pass through the diode on the positive half of the cycle, while the negative half of the cycle will be blocked. This is known as rectification, as the AC voltage is effectively transformed into a DC voltage.

Conclusion

The HSM825G/TR13 is a low-power, low-voltage single-phase rectifier that is used to convert AC voltage to DC voltage. The diode is suitable for a wide range of applications, such as rectifying the output of a power supply, providing “ON / OFF” switch control, controlling oscillators or timing circuits, protecting against voltage surges, and more. In addition, the diode acts as a one-way valve, allowing electricity to flow in one direction only.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description