HV9910CLG-G Integrated Circuits (ICs)

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Description

HV9910CLG-G is an open-loop, current-mode control, LED driver IC. This IC can be programmed to operate in either a constant frequency or constant off-time mode. It includes a 15 – 450V linear regulator which allows it to work with a wide range of input voltages without the need for an external low voltage supply. HV9910C includes a TTL-compatible, PWM-dimming input that can accept an external control signal with a duty ratio of 0 – 100% and a frequency of up to a few kilohertz. It also includes a 0 – 250mV linear-dimming input which can be used for linear dimming of the LED current. Unlike the HV9910B, the HV9910C is equipped with built-in thermal-shutdown protection. HV9910C is ideally suited for buck LED drivers. Since the HV9910C operates in open-loop current mode control, the controller achieves good output current regulation without the need for any loop compensation. Also, being an open-loop controller, PWM-dimming response is limited only by the rate of rise of the inductor current, enabling a very fast rise and fall times of the LED current. HV9910C requires only three external components (apart from the power stage) to produce a controlled LED current. This makes HV9910C an ideal solution for low-cost LED drivers. 

2. Features

    1. Switch mode controller for single switch LED drivers

    2. Enhanced drop-in replacement to the HV9910B

    3. Open loop peak current controller

    4. Internal 15 to 450V linear regulator

    5. Constant frequency or constant off-time operation

    6. Linear and PWM dimming capability

    7. Requires few external components for operation

    8. Over-temperature protection

3. Applications

    1. DC/DC or AC/DC LED driver applications

    2. RGB back-lighting LED driver

    3. Back lighting of flat panel displays

    4. General purpose constant current source

    5. Signage and decorative LED lighting

    6. Chargers

4. Pin configuration

5. Pin description