HW006A0M1-S

Current - Output (Max):	6A
Control Features:	Enable, Active Low
Size / Dimension:	1.86" L x 1.16" W x 0.33" H (47.2mm x 29.5mm x 8.5mm)
Package / Case:	18-SMD Module, 6 Leads
Mounting Type:	Surface Mount
Efficiency:	80%
Operating Temperature:	-40°C ~ 85°C
Features:	Remote On/Off, OCP, OTP, OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	2.25kV
Power (Watts):	9W
Series:	HW006
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	1.5V
Voltage - Input (Max):	75V
Voltage - Input (Min):	36V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Obsolete
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction To DC DC Converters

DC DC converters are a type of power supply that take a direct current (DC) input and convert it to a different DC output, usually at a different voltage level. DC DC converters are widely used in a range of applications, from small portable electronics to large industrial systems. They are used for voltage conversion, power regulation, isolated load and power exchange between circuits. DC DC converters are highly efficient, reliable, and cost effective solutions for powering electronic devices.

Applications Of DC DC Converters

DC DC converters are used in numerous applications.

• Power Supplies: DC DC converters are used in power supplies to provide an isolated DC voltage output to the load.
• Battery Chargers: DC DC converters are used in battery chargers to regulate the power being supplied from the charger to the battery.
• Automotive Systems: DC DC converters are used in automotive systems to convert the car battery’s voltage to a level that is appropriate for running the onboard electronics.
• Portable Electronics: DC DC converters are used in portable electronics to step down the voltage of a larger power source, like a 9V battery, to the levels appropriate for powering small portable devices.

Working Principle Of DC DC Converters

DC DC converters are typically designed to accept a DC input voltage and convert it to a lower or higher DC output voltage. They typically use a combination of inductors and capacitors in the circuit to store energy and release it as output voltage.The DC input voltage is typically applied to the primary windings of an isolating transformer. The voltage is stepped down through the transformer’s secondary windings and then rectified through a rectifier diode. The rectified voltage is then filtered by an electrolytic capacitor to eliminate voltage ripples.The capacitors and inductors are connected in series or parallel to make up the output stage of the DC DC converter. The inductors in the circuit act as energy storage devices, where energy is stored in the form of current. This stored energy is released as the inductors collapse, providing the output voltage. The capacitor in the circuit acts as an energy filter, smoothing the output voltage.

HW006A0M1-S Application Field

The HW006A0M1-S is a DC-DC converters that is used in various industrial applications for isolated load and power exchange between different circuits. The HW006A0M1-S has a wast input voltage range of 3.3V to 32V and an output voltage range of 5V to 36V. It provides a single output with 5A continuous, 10A peak and 1mV accuracy. It also features short circuit and thermal shutdown protection and high efficiency design to provide reliable operation.

Conclusion

DC DC converters are essential components for power supplies, battery chargers, automotive systems, and portable electronics. They accept a DC input voltage and convert it to a lower or higher DC output voltage. DC DC converters are typically designed with a combination of inductors and capacitors in the circuit. The HW006A0M1-S is a DC-DC converters that is used in various industrial applications and provides a range of features that ensure reliable operation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description