Allicdata Part #: | I74F657N,112-ND |
Manufacturer Part#: |
I74F657N,112 |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | NXP USA Inc |
Short Description: | IC TXRX NON-INVERT 5.5V 24DIP |
More Detail: | Transceiver, Non-Inverting 1 Element 8 Bit per Ele... |
DataSheet: | I74F657N,112 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | 74F |
Packaging: | Tube |
Part Status: | Obsolete |
Logic Type: | Transceiver, Non-Inverting |
Number of Elements: | 1 |
Number of Bits per Element: | 8 |
Input Type: | -- |
Output Type: | 3-State |
Current - Output High, Low: | 3mA, 24mA |
Voltage - Supply: | 4.5 V ~ 5.5 V |
Operating Temperature: | -40°C ~ 85°C (TA) |
Mounting Type: | Through Hole |
Package / Case: | 24-DIP (0.300", 7.62mm) |
Supplier Device Package: | 24-DIP |
Base Part Number: | 74F657 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The I74F657N,112 is part of a family of devices which includes buffers, drivers, receivers, and transceivers. These components are all used to control, receive, and send digital logic signals in a variety of applications.
Buffers
Buffers are used to drive the output signals for a digital circuit. Buffers act as an amplifier to increase the current drive on the output signals. Buffers are composed of inverting and non-inverting stages. The I74F657N,112 is a quadruple bidirectional buffer, meaning it has both inverting and non-inverting stages that can be used to both output and receive data. The device can be used to drive signals over long distances, reducing signal loss due to current leakage.
Drivers
Drivers are used to send and receive digital signals in a digital circuit. Drivers are usually a combination of a buffer and a latch. A latch is used to hold the digital signal for a certain amount of time. The I74F657N,112 is a three-state TTL driver, meaning it has both inverting and non-inverting stages that can be used to both output and receive data. The device can be used to drive high-speed digital signals over long distances, reducing signal interference.
Receivers
Receivers are used to detect digital signals in a digital circuit. Receivers are composed of amplifiers and detectors. The I74F657N,112 is a three-state TTL receiver, meaning it has both inverting and non-inverting stages that can be used to both detect and receive data. The device can be used to detect high-speed digital signals over long distances, reducing signal noise.
Transceivers
Transceivers are used to send and receive data in a digital circuit. Transceivers are composed of a modulator and demodulator. The I74F657N,112 is a three-state TTL transceiver, meaning it has both transmitting and receiving capabilities. The device can be used to send and receive data over long distances, reducing signal interference.
Application Field and Working Principle of I74F657N,112
The I74F657N,112 is a quad bidirectional buffer, driver, receiver and transceiver. It is designed to drive, receive, transmit and control high speed data signals in digital circuits. The I74F657N,112 device is typically used in applications where high speed data exchanging is necessary such as in communication networks, digital signal processing, video processing, or systems with high speed data buses. The I74F657N,112 device has a low input/output capacitance which reduces signal losses when driving and receiving data signals. The I74F657N,112 device also has high speed switching and low noise performance.
The I74F657N,112 device works by using a combination of inverting and non-inverting stages for buffering, driving, receiving and transmitting data signals. The device has an open-collector output stage that drives the input/output logic levels high or low. The device also has a two-level logic configuration: High logic level and low logic level. The I74F657N,112 device also has a three-state logic configuration that can be used to enable or disable the transmission or reception of data signals.
The I74F657N,112 device also has a built-in ESD protection circuit that helps protect against electrostatic discharge. The device also has a thermal protection system that helps protect the device from overheating. The device also has a built-in noise protection circuit that helps reduce noise in digital circuits.
The I74F657N,112 device is designed to provide a high degree of accuracy and reliability in digital applications. It is a versatile device that can be used to build a variety of digital systems. The I74F657N,112 device is a reliable and cost-effective solution for driving, receiving, and transmitting high speed data signals in digital circuits.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
I74F133D,118 | NXP USA Inc | 0.0 $ | 1000 | IC GATE NAND 1CH 13-INP 1... |
I74F133D,112 | NXP USA Inc | 0.0 $ | 1000 | IC GATE NAND 1CH 13-INP 1... |
I74F3037D,518 | NXP USA Inc | 0.0 $ | 1000 | IC GATE NAND 4CH 2-INP 16... |
I74F3037D,512 | NXP USA Inc | 0.0 $ | 1000 | IC GATE NAND 4CH 2-INP 16... |
I74F164D,118 | NXP USA Inc | 0.0 $ | 1000 | IC 8BIT SERIAL SHIFT REG ... |
I74F164D,112 | NXP USA Inc | 0.0 $ | 1000 | IC 8BIT SERIAL SHIFT REG ... |
I74F164N,112 | NXP USA Inc | 0.0 $ | 1000 | IC 8BIT SERIAL SHIFT REG ... |
I74F657D,112 | NXP USA Inc | 0.0 $ | 1000 | IC TRANSCVR NON-INVERT 5.... |
I74F657D,118 | NXP USA Inc | 0.0 $ | 1000 | IC TRANSCVR NON-INVERT 5.... |
I74F657N,112 | NXP USA Inc | 0.0 $ | 1000 | IC TXRX NON-INVERT 5.5V 2... |
I74F133N,112 | NXP USA Inc | 0.0 $ | 1000 | IC GATE NAND 1CH 13-INP 1... |
I74F86D,602 | NXP USA Inc | 0.0 $ | 1000 | IC GATE XOR 4CH 2-INP 14S... |
I74F00D,602 | NXP USA Inc | 0.0 $ | 1000 | IC GATE NAND 4CH 2-INP 14... |
IC TRANSCVR NON-INVERT 5.5V 24SOTranscei...
IC TXRX NON-INVERT 5.5V 20SSOPTransceive...
IC BUF NON-INVERT 3.6V 60HXQFNBuffer, No...
IC TXRX NON-INVERT 3.6V 48TSSOPTransceiv...
IC TXRX NON-INVERT 5.5V 56TSSOPTransceiv...
IC ADDRESS DRVR 3.6V 56TSSOPAddress Driv...