ICE2A765P2BKSA1

Duty Cycle:	72%
Base Part Number:	ICE2A765
Mounting Type:	Through Hole
Supplier Device Package:	PG-TO220-6
Package / Case:	TO-220-6 Formed Leads
Operating Temperature:	-40°C ~ 150°C (TJ)
Control Features:	Soft Start
Fault Protection:	Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage
Power (Watts):	240W
Frequency - Switching:	100kHz
Series:	CoolSET®F2
Voltage - Supply (Vcc/Vdd):	8.5 V ~ 21 V
Voltage - Start Up:	13.5V
Topology:	Flyback
Voltage - Breakdown:	650V
Internal Switch(s):	Yes
Output Isolation:	Isolated
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - AC DC Converters, Offline Switchers, ICE2A765P2BKSA1

ICE2A765P2BKSA1 is a power supply controller IC developed by Holtek Semiconductor that supports both active-clamp flyback converters and boost/buck topology. This integrated circuit operates with single-end power supply and provides comprehensive wide-range standby power (from 0 to 50 Watts) for AC/DC power supplies. It integrates an active clamp and a quasi-resonant switch (QRS) modulator, which is used to provide a good efficiency even at low output power. ICE2A765P2BKSA1 is a high-performance, low-cost solution for a variety of applications that require energy efficiency, fast transient response, wide input input and separation of critical power from non-critical power. The ICE2A765P2BKSA1 is ideal for applications such as refrigerators, ambient lighting, automated machines, and many more. Its features include low quiescent operating current, low start-up power, fast transient response, multi-level protection and soft-start mode. Additionally, this integrated circuit features a variety of protections, including a thermal cut-off, anti-surge protection, over-voltage protection, output short circuit protection, and an over-current protection. This IC\'s highly-integrated design also provides an adjustable frequency range that can be set from 100 Hz to 1 MHz, allowing for efficient operation at a variety of load conditions. Additionally, its innovative design also provide a wide input voltage range across the input mains and a synchronization breadth of up to 20 kHz. The power supply design for the ICE2A765P2BKSA1 consists of two stages. The first stage is responsible for boosting the input voltage from the input mains to a higher voltage that is necessary for operation. The second stage is responsible for regulating the output voltage and ensuring that it is kept within the specified range. The ICE2A765P2BKSA1 active-clamp flyback topology is capable of providing a wide input voltage range, low idle current, fast transient response, and lower EMI/EMC performance. Additionally, its quasi-resonant switch (QRS) modulator increases the efficiency at light loads and reduces the output voltage ripple. Ultimately, the ICE2A765P2BKSA1 is an all-in one power conversion solution that is designed to provide high-efficiency, high-reliability, wide input, and stable-output operation for a variety of applications. Its ultra-low quiescent current, fast transient response, wide input range, and soft-start mode make it ideal for energy-saving and high-performance applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description