ICS894D115BGI-01

The ICS894D115BGI-01 from Integrated Device Technology, Inc. (IDT) is a Clock/Timing Application Specific device operating at a 3.3V supply voltage and 800ps Period Jitter. The ICS894D115BGI is a MEMS Clock Driver and Buffer solution for single and two-phase systems. It provides reliable clocking for low-profile surface-mount systems and is especially suitable for such applications such as high-speed data systems and other telecommunications systems.

The ICS894D115BGI-01 clock driver is designed to provide a low-frequency non-programmable clock buffer capable of driving multiple phase clocks providing a reliable clock signal to the system. It has two phase outputs and a single input pad, both non-programmable. The ICS894D115BGI-01 supports a wide range of clock frequencies up to 40MHz and is designed to drive both differential and single ended output clock signals.

The ICS894D115BGI-01 clock driver also has a built-in ESD protection circuit that can protect itself from electrostatic discharge and power surges up to 1.5 kV on the device pins and 4 kV at the input pad. This protects it from short circuits and over-voltages that may occur during the operations of the device. The ICS894D115BGI-01 can also sustain wide VDD supply ranges from 1.71V to 5.5V, allowing it to be used in a variety of system applications.

The ICS894D115BGI-01 operates by allowing the clock signals to be passed through the non-programmable pads, providing a reliable clock signal to the system. The clock input is fed into the buffer through the single pad and amplified before the clock signal is outputted through the dual-level outputs without distortion or edge-rate jitter. The ICS894D115BGI-01 allows low-jitter clock signals to be propagated without loss or errors and provides a reliable clock signal to the system.

The ICS894D115BGI-01 is an ideal device for applications such as network equipment and base station systems, telecommunications systems, digital video and consumer audio products, network clock modules and other applications that require a low-profile, low-jitter clock buffer.

In conclusion, ICS894D115BGI-01 is a Clock/Timing Application Specific device operating at a 3.3V supply voltage and 800ps Period Jitter, designed to provide reliable clocking for low-profile surface-mount systems and is especially suitable for such applications as high-speed data systems and other telecommunications systems. It has ESD protection circuit, supports a wide range of clock frequencies up to 40MHz and is designed to drive both differential and single ended output clock signals.