ICS83052AGI-01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ICS83052AGI-01 is a clock buffer from IDT, optimized for low power, latency, and PCB area. It has ESD protections up to 2kV and 8 channel output. This makes it suitable for a wide range of applications such as telecom, datacom, and consumer electronics.

The ICS83052AGI-01 is an integrated buffer for transmission and reception of various serial clock signals, including differential or single-ended logic. It provides up to eight (8) outputs up to 2.5GHz and supports frequency translation ratios up to 1:20. Its internal frequency (FREF) and reference clock (FREF) are used to change the input clock frequency, allowing an external source to be multiplied or divided to create an output signal.

The ICS83052AGI-01 has two internal frequency modes. The first is a single clock mode, and the second is a dual clock mode. In the single clock mode, the reference and frequency signals are both divided by a single divider to create the output signal. In the dual clock mode, the reference and frequency signals are divided by different dividers to create the output signal.

The ICS83052AGI-01 supports up to three (3) output formats. The first is the 3-state output that is used for data transmission. This output has a high impedance state that will prevent any signal from being passed, allowing the system to switch between a high and low signal. The second is the DDR output that is used for data transmission. This output has a high-low, low-high transition of the data signal, allowing the system to switch between the two signals. The third is the SSTL output that is used for data receiving. This output has a low impedance state and will pass any signal, allowing the system to receive data in a single transition.

The ICS83052AGI-01 also has very low jitter, output skew, and power consumption levels. The jitter level is as low as 4.5ps, and the output skew is as low as 8ps. The power consumption of the buffer is only 3.3mW, which is much lower compared to other buffers in the same market segment.

The ICS83052AGI-01 is ideal for applications such as clocks and timing systems, microprocessors and computers, switching and memory systems, data networks, HD and UHD displays, and communications systems. Its wide output range and high performance make it suitable for these applications, allowing the system to receive or transmit data reliably and efficiently.

In conclusion, the ICS83052AGI-01 is an excellent choice for clock buffering, providing high performance and low power consumption. Its wide output range, low jitter and output skew levels, as well as its ESD protections make it suitable for a variety of applications. Its low power and high performance make it one of the best clock buffers available in the market and it is sure to meet the needs of most clock and timing systems.

The specific data is subject to PDF, and the above content is for reference