Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single

The IDP23011XUMA1 is a rectifier diode, categorized under single diode rectifiers. A diode is a two-terminal device that allows current to flow in one direction but blocks when the direction of the current is reversed. This component is commonly used to protect electrical circuits from high voltage or "spikes". Rectifier diodes are a type of diode specifically used in electronics to change alternating current (AC) to direct current (DC). Rectifier diodes are often used in power supplies and voltage converters. They are popular in projects involving LED lights, solenoids, and motors. Rectifier diodes can be used in a wide range of applications; from motor speed control and solar power systems, to the control of voltage spikes in computers. The IDP23011XUMA1 rectifier diode is a single device, with an 800-volt maximum forward voltage rating. This component has a power dissipation of 500 milliwatts (mW). The maximum surge forward current of the IDP23011XUMA1 is 30 Amp and the maximum continuous forward current is 0.5 Amp. This component has a reverse current leakage of 10 microamp (10µA). The forward voltage drop of the IDP23011XUMA1 is typically 0.7 volts. The operation temperature can range between -50 and 175 degrees Celsius. This device has glass passivated junction. It has a high-temperature soldering profile of 260°C for 10 seconds. The maximum reverse voltage (Vr) is 800 volts, while the reverse recovery time (trr) is 15 nano seconds.To act as a rectifier, the IDP23011XUMA1 diode block the flow of current in one direction, while allowing it to pass through in the other direction. Ideally, a rectifier diode passes only unidirectional current in one direction with no loss of power. The IDP23011XUMA1 uses a Schottky rectifier structure which enables lower reverse recovery time, faster switching and higher efficiency compared to a standard diode. The diode has low forward voltage drop, which reduces the amount of power lost due to heat. The main application of the IDP23011XUMA1 is for electrical circuits to protect them from high voltage or other power spikes. It has a surge current rating of 30 Amp and a reverse recovery time of 15 nano-seconds. It is designed to be used with an 800-volt maximum voltage rating. The component is typically used in applications involving LED lights, solenoids, and motors. The IDP23011XUMA1 rectifier diode is a component used in many types of electrical circuits and devices. It has a reverse leakage of 10 microamp which protects against sub-threshold leakage currents. It is used in power supplies and voltage converters to enable the conversion of alternating current to direct current. This component is well suited to applications where there is a need to provide a surge current protection or voltage regulation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description