IDT49FCT3805QI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IDT49FCT3805QI8 is a low-skew, low-noise, FIFO-buffered, clock fanout buffer that is often used in both industrial and communications applications. It is an ideal solution for applications requiring clock accuracy, such as communication protocols like PCIe, Ethernet and Fibre Channel. The IDT49FCT3805QI8 has multiple output pairs that can be configured to provide either non-inverting or inverting outputs.

The IDT49FCT3805QI8 is classified as a clock buffer, driver and timing device for applications such as synchronous communications and industrial automation. It is designed to improve the accuracy and reliability of clock distribution and communication systems. This makes the device particularly well suited for applications where high speed, low jitter and low noise are key requirements.

The IDT49FCT3805QI8 provides up to 8 outputs, each of which is programmable for up to four different output configurations. The outputs are capable of delivering low-skew, low-noise clock signals with frequency up to 100MHz. The device can be programmed via pins, I2C or with a small serial EEPROM. The IDT49FCT3805QI8 provides built-in power-on reset and optional programmable power-fail reset.

The IDT49FCT3805QI8 is designed to be used in a wide variety of situations where clock accuracy and reliability are desired, such as high-speed communications protocols or industrial automation. It is an ideal solution for applications requiring the ability to control multiple signals with a single clock source. It is an excellent choice for clocking applications such as Fibre Channel, Ethernet, InfiniBand and PCI Express, as well as other protocol applications.

The IDT49FCT3805QI8 is designed to provide reliable clock distribution with the lowest possible jitter and noise. It has an adjustable pre-determined slew rate, which can be used to reduce clock skew and optimize signal integrity. The IDT49FCT3805QI8 supports 2.5V and 3.3V output levels and is capable of powering low voltage and high voltage outputs. It also supports both static and dynamic output programming.

The IDT49FCT3805QI8 is a low-skew, low-noise clock fanout buffer that is well suited for clock distribution and communication systems. It allows for multiple outputs to be configured to provide either non-inverting or inverting outputs, which can be programmed via pins, I2C or small serial EEPROMs. It supports a wide range of clock frequencies, from 10MHz to 100MHz, and is ideal for applications requiring low jitter and low noise. Its adjustable pre-determined slew rate improves clock skew and optimizes signal integrity. It supports 2.5V and 3.3V output levels and can be used to power low voltage and high voltage outputs. Additionally, the IDT49FCT3805QI8 supports both static and dynamic output programming, making it ideal for applications that require clock accuracy, including high-speed communications protocols, industrial automation, and synchronous communications.

The specific data is subject to PDF, and the above content is for reference