IDT49FCT805APY8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IDT49FCT805APY8 is a high-performance 8-bit universal asynchronous receiver/transmitter (UART) designed to provide protocol-independent serial data exchange between two independently clocked data link devices. It offers advanced features such as on-chip buffering, interrupt-driven programmable FIFOs, and enhanced data transmission and reception capabilities in the form of software selectable baud rates, parity bits, and stop bits. This makes the IDT49FCT805APY8 ideal for a variety of applications such as data acquisition, data transmission, networking, and communications.

The IDT49FCT805APY8 belongs to the Clock/Timing - Clock Buffers, Drivers family. It features an 8-pin small-outline integrated circuit (SOIC) that can be used for both buffering and driving clock and data signals. It also features a flexible CMOS architecture that allows for a wide range of data rates from 0 to 16 Mbps and a programmable I/O waveform to minimize power while maintaining high performance. Furthermore, it has a very low active- and standby-power consumption, making it an ideal choice for applications that require high-performance timing and data buffering.

The IDT49FCT805APY8 offers a number of features that make it the perfect choice for high-speed, low-power applications. These features include an on-chip single-channel clock buffer and an on-chip clock to synchronize all the data transfer operations. Additionally, the device provides an interruption on data reception, an autobaud mode that automatically adjusts the baud rate to match the data, and an integrated PLL that can be used to adjust the input frequency. In addition, the IDT49FCT805APY8 is capable of providing up to 16-bit data words in a variety of configurations, making it suitable for all types of communication protocols and data transfers.

The IDT49FCT805APY8\'s working principle is quite simple. It uses an asynchronous data bus interface for communication with external devices. This interface is capable of transferring data at a rate of 0 to 16 Mbps, depending on the protocol defined by the user. The IDT49FCT805APY8 also has an internal 8-bit universal UART buffer, which acts as a bridge between the data bus interface and the external devices. This buffer is also used to store and re-route data during a data transfer operation.

The IDT49FCT805APY8 also has a flexible bus architecture that allows for a variety of data-transfer protocols. The device also supports interrupt-driven programmable FIFOs that provide software selectability between continuous and burst mode of data transfer. This means that the user can select either one of these modes depending on the requirement. This makes the device suitable for both serial and parallel data transfer operations.

In brief, the IDT49FCT805APY8 is a high-performance 8-bit universal asynchronous receiver/transmitter (UART) designed to provide protocol-independent serial data exchange between two independently clocked data link devices. It features an 8-pin small-outline integrated circuit (SOIC) that can be used for both buffering and driving clock and data signals, as well as a very low active- and standby-power consumption. It has a flexible bus architecture that allows for a variety of data-transfer protocols and supports interrupt-driven programmable FIFOs that provide software selectability between continuous and burst mode of data transfer. The device\'s simple yet powerful working principle makes it the perfect choice for applications that require high-speed, low-power performance.

The specific data is subject to PDF, and the above content is for reference