IHB6BV123K

Series:	IHB
Packaging:	--
Part Status:	Active
Type:	Wirewound
Material - Core:	--
Inductance:	12mH
Tolerance:	±10%
Current Rating:	1.6A
Current - Saturation:	--
Shielding:	Unshielded
DC Resistance (DCR):	1.54 Ohm Max
Q @ Freq:	--
Frequency - Self Resonant:	--
Ratings:	--
Operating Temperature:	-55°C ~ 130°C
Inductance Frequency - Test:	1kHz
Features:	--
Mounting Type:	Through Hole
Package / Case:	Radial
Supplier Device Package:	--
Size / Dimension:	2.000" Dia (50.80mm)
Height - Seated (Max):	1.500" (38.10mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed InductorsInductors belong to the group of electrical components that store energy in the form of a magnetic field when electric current flows through them. Fixed inductors are typically constructed with a coil of wire, and consist of a non-variable, passive, two-terminal electrical component. Because of its construction and installation, a fixed inductor is one of the simplest and most reliable components in electronics devices.The IHB6BV123K is a fixed inductor that operates in a frequency range of 0.05 MHz to 100 MHz. This inductor has a maximum inductance of 10 uH, and tolerances of ±20%. It is suitable for use in high-frequency, low-power switching-regulator and converters, flyback transformers, and other similar circuitry.The basic theoretical concept behind the fixed inductor is Faraday\'s law of induction. This states that the amount of induced electromotive force (EMF), or voltage, is proportional to the rate of change of the magnetic flux through the circuit. As current passes through the winding of an inductor, the flux generated at the center of the winding of an inductor also induces a voltage that opposes the current. This phenomenon is known as self-inductance.The physical form of a fixed inductor is composed of a coil of wire, generally made out of copper, but can be made out of other materials such as aluminum, iron and steel. This coil is wrapped around a ferrite or powdered iron core, which increases the magnetic field surrounding the coil. Without the core, most inductors become much weaker in their ability to generate a magnetic field and do not possess the same degree of inductance. The amount of inductance produced by the IHB6BV123K fixed inductor depends on several factors such as the core material and diameter of the coil. Generally, a larger coil will generate more inductance because it can support the more magnetic flux and the core material of the inductor will determine the maximum possible inductance. Additionally, the number of turns in the coil affects the inductance of the component. Typically, the more turns there are in the coil, the more inductance it can produce.Fixed inductors are widely used in electronic circuits, usually to help reduce changes in current or voltage over time. Common applications include low-pass filters, high pass filters, impedance matching, surge suppression, voltage stabilization, frequency control, and energy storage. In addition, these inductors are often used as RF decoupling components in RF amplifiers and can also be found in RF circuits.In summary, the IHB6BV123K fixed inductor is designed to provide a stable and reliable electrical signal with high frequency accuracy. With its wide range of capabilities, it is an invaluable component for many applications in the modern electronic industry.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description