IHB6EB123K

Series:	IHB
Packaging:	--
Part Status:	Active
Type:	Wirewound
Material - Core:	--
Inductance:	12mH
Tolerance:	±10%
Current Rating:	1.6A
Current - Saturation:	--
Shielding:	Unshielded
DC Resistance (DCR):	1.54 Ohm Max
Q @ Freq:	--
Frequency - Self Resonant:	--
Ratings:	--
Operating Temperature:	-55°C ~ 130°C
Inductance Frequency - Test:	1kHz
Features:	--
Mounting Type:	Through Hole
Package / Case:	Radial
Supplier Device Package:	--
Size / Dimension:	2.000" Dia (50.80mm)
Height - Seated (Max):	1.500" (38.10mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Fixed inductors, sometimes referred to as self-interference generators, are widely used to store and deliver energy for electrical and electronic circuits. The IHB6EB123K is a type of fixed inductor that can be used for different types of applications. This article seeks to discuss its application fields, working principles and construction.

Application Field

The IHB6EB123K is a type of fixed inductor that is used in a variety of applications. These include power supplies, switching regulators, logic integrated circuits, DC-DC converters, frequency converters, and audio amplifiers.The inductor can even be used to regulate and stabilize the voltage of the circuit. It can also be used to filter noise from the power supply, DC-DC converter, or logic integrated circuit.The IHB6EB123K can also be used in more demanding applications such as high-frequency applications. This includes RF applications, HF radio antennas, switching power supplies, and antenna pre-filters. The inductor can also be used in noise control systems and RF amplifiers.

Working Principle

The IHB6EB123K fixed inductor works by producing a magnetic field when an alternating current is applied. This field is partially responsible for the inductor’s ability to store and deliver energy.The inductor works by converting an alternating current into a direct current. This is made possible by the coil of wire inside it. When there is an external current source, the coil produces a magnetic field. This field induces a current in the coil, which then produces a voltage across it. This voltage is then used to power the circuit.The inductor also acts as a filter, as it blocks high-frequency electronic signals and allows low-frequency signals to pass through.

Construction

The construction of the IHB6EB123K consists of a coil of wire wrapped around a ferromagnetic core. The inductor also includes a capacitor, which helps to regulate the current, and a resistor, which helps to reduce the level of noise present in the circuit.The core of the inductor is made from ferrite material, which helps to reduce the amount of flux leakage. The capacitor and resistor are usually placed inside the ferrite core.The IHB6EB123K has a range of configurations that can be adjusted, depending on the circuit it is being used in. This includes adjusting the number of turns in the coil, the gauge of the wire, and the type of resistors and capacitors that are used.

Conclusion

The IHB6EB123K fixed inductor is a versatile device that is used in a wide range of applications. Its construction consists of a coil of wire wrapped around a ferromagnetic core, with a capacitor and resistor placed inside. It works by producing a magnetic field, which induces a current in the coil of wire and produces a voltage. This voltage is then used to power the circuit. The IHB6EB123K can also be used to filter noise from the power supply, DC-DC converter, or logic integrated circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description