Allicdata Part #: | IL766B-2-ND |
Manufacturer Part#: |
IL766B-2 |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Vishay Semiconductor Opto Division |
Short Description: | OPTOISO 5.3KV DARLINGTON 6DIP |
More Detail: | Optoisolator Darlington Output 5300Vrms 1 Channel ... |
DataSheet: | IL766B-2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Output Type: | Darlington |
Supplier Device Package: | 6-DIP |
Package / Case: | 6-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -55°C ~ 100°C |
Vce Saturation (Max): | 1V |
Current - DC Forward (If) (Max): | 60mA |
Voltage - Forward (Vf) (Typ): | 1.25V |
Current - Output / Channel: | -- |
Voltage - Output (Max): | 60V |
Series: | -- |
Input Type: | AC, DC |
Rise / Fall Time (Typ): | -- |
Turn On / Turn Off Time (Typ): | 200µs, - |
Current Transfer Ratio (Max): | -- |
Current Transfer Ratio (Min): | 900% @ 500µA |
Voltage - Isolation: | 5300Vrms |
Number of Channels: | 1 |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The IL766B-2 is an optoisolator from Vishay, which uses a transistor and photovoltaic output, allowing for the transfer of signals between two electrically isolated circuits without any direct electrical connection. This can help to reduce noise and other electrical interference from affecting the sensitive components within a circuit.
The IL766B-2 can be used to couple both analog and digital signals from one side to the other. It consists of a light-emitting diode (LED) connected to a phototransistor that amplifies the signal. The output of the phototransistor is then connected to other components in the circuit depending on the application. The IL766B-2 can switch between low (1mA) and high (20mA) outputs, allowing it to respond to different input levels.
The IL766B-2 can find applications in a variety of different systems, such as industrial and commercial electronics, automotive systems, medical equipment, communications systems, consumer electronics, and process control systems. In each use, the optoisolator serves to isolate the two circuits while still preserving the signal, protecting sensitive components from excessive voltage or noise.
The working principle of the IL766B-2 is relatively simple: when a small current is applied to the LED, it emits light that is received by the phototransistor, which produces an amplified electrical signal. The output from this signal is then used to drive other components in the circuit, and the amount of current can be regulated by adjusting the input current or the output resistance.
The IL766B-2 offers users an efficient way to transfer electrical signals between circuits without creating a physical connection. It could potentially be used for a variety of applications that require the transfer of both analog and digital signals, such as industrial automation systems, consumer electronics products, and automotive systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
IL766B-1 | Vishay Semic... | -- | 1000 | OPTOISO 5.3KV DARLINGTON ... |
IL766B-2 | Vishay Semic... | 0.0 $ | 1000 | OPTOISO 5.3KV DARLINGTON ... |
IL766B-2X009T | Vishay Semic... | 0.0 $ | 1000 | OPTOISO 5.3KV DARLINGTON ... |
IL766B-2X016 | Vishay Semic... | 0.0 $ | 1000 | OPTOISO 5.3KV DARLINGTON ... |
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...