IL766B-2X016

Output Type:	Darlington
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.400", 10.16mm)
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 100°C
Vce Saturation (Max):	1V
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.25V
Current - Output / Channel:	--
Voltage - Output (Max):	60V
Series:	--
Input Type:	AC, DC
Rise / Fall Time (Typ):	--
Turn On / Turn Off Time (Typ):	200µs, -
Current Transfer Ratio (Max):	--
Current Transfer Ratio (Min):	900% @ 500µA
Voltage - Isolation:	5300Vrms
Number of Channels:	1
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The IL766B-2X016 is an optoisolator - transistor, photovoltaic output, which contains a photo voltage converter coupled to a high voltage output transistor. It provides an electrical isolation between two circuits via its light emitting diode (LED) and phototransistor. The IL766B-2X016 optoisolator helps to protect one circuit from the other by preventing the transfer of electrical noise and voltage transients.

Applications

The IL766B-2X016 is designed for a wide range of applications, including RS-232 interface data transfers, thyristor polarizing and control, pressure sensitive switch inputs, motion control, and many more. It is particularly useful in environments that could be affected by electromagnetic interference (EMI) due to its electrical isolation capabilities. It can also be used in environments with high noise levels, where an optoisolator is needed to protect sensitive electrical equipment.

Structure

The IL766B-2X016 is a 4-pin DIP device. It contains an integrated LED and phototransistor within the same package. The LED emits light that is detected by the phototransistor and then amplified to produce an output signal. The package also includes a damping resistor to help reduce output transients.

Working Principle

The IL766B-2X016 optoisolator works by converting an electrical signal into optical energy and then back again. When an electrical input is applied, the LED emits light that is then detected by the phototransistor. The phototransistor amplifies the electrical signal which is then converted back into an electrical output. This output signal can then be used to drive another circuit or control device. The device also has a high voltage rating that allows it to reliably pass electrical signals even in high voltage environments. This makes it an ideal choice for applications such as motion control where high voltage spikes can be encountered.

Conclusion

The IL766B-2X016 optoisolator is a versatile device that can be used in a variety of applications to provide electrical isolation between two circuits. It contains an integrated LED and phototransistor within the same package, allowing the transfer of electrical signals without the risk of electrocution or incorrect wiring. Its high voltage rating makes it particularly suited for high voltage applications, such as motion control, and its damping resistor helps reduce transients.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description