ILSB0603ER8R2K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components with coils or windings constructed from a fixed length of wire. This means the inductance of the inductor is a fixed and set value dependent on the number of windings, and the diameter and length of the wire. Fixed inductors are a core component in electrical circuits and prevent certain specific frequencies from passing through. In certain circuits, fixed inductors perform almost identically to gas discharge tubes, but with much higher inductance values and power ratings.

The ILSB0603ER8R2K is a fixed inductor manufactured by ILS Technology (ILST). The package size is 0603 (1.6mm x 0.8mm), while the core material of the inductor is ferrite. This inductor has an inductance of 8.2nH +/-10% with a rated current up to 730mA. The inductor has a Q at 100kHz of greater than 23, and its DCR (direct current resistance) is 0.15 ohms maximum. This inductor is a perfect choice for power/ EMI suppression, snubbing, audio-visual equipment, and cellular phones.

The ILSB0603ER8R2K fixed inductor is a coil of wire wound in a number of turns around a core of air, a solid material, such as iron or ferrite. The core material is important as it affects the inductance value of the inductor. The inductance of the ILSB0603ER8R2K is 8.2nH +/-10%. This value is determined by the number of turns in the coil and the diameter of the wire. The higher the number of turns and the larger the diameter of the wire, the higher the inductance.

When the inductor is placed in an electrical circuit, it serves to block signals of a certain frequency. The current passing through the inductor creates a magnetic field, with the same number of turns in the coil. This field opposes the current, and the higher the number of turns, the greater the opposing force, and the greater the blockage of the signal.

The ILSB0603ER8R2K is rated at 730mA and can withstand an operating temperature of -40°C to +85°C. It also has a Q at 100kHz of greater than 23, and a DCR of 0.15 ohms maximum. As a result, the ILSB0603ER8R2K is suitable for applications in which a high inductance, low DCR, and high Q value are required, such as power/ EMI suppression, snubbing, audio-visual equipment, and cellular phones.

In conclusion, the ILSB0603ER8R2K is a fixed inductor with an inductance of 8.2nH +/-10%, rated current of 730mA, and a Q at 100kHz of greater than 23. It is suitable for the aforementioned applications due to its low DCR and high Q value. As an added bonus, the ILSB0603ER8R2K has an operating temperature range from -40°C to +85°C, making it suitable for almost any environment.

The specific data is subject to PDF, and the above content is for reference