ILSB0603ERR39K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are components that store energy in the form of an electric current. They are also known as chokes or coils and in some cases, they can also act as transducers. Fixed inductors are characterised by their fixed inductance, which doesn’t change as the current changes. The ILSB0603ERR39K is a fixed inductor designed primarily for use in switching power supplies, filter circuits and LED bulbs.

The ILSB0603ERR39K is a surface-mountable inductor featuring an inductance of 0.39uH, a DCR of 0.74ohms, and a rated current of 4.1A. The inductor is designed to be used in environments that use up to 100 volts. Its maximum height is 3.3mm and its maximum diameter is 4.3mm.

The ILSB0603ERR39K has an operating temperature range of -25°C to +100°C, making it suitable for both high and low temperature applications. The inductor also features an operating frequency range of up to 2.5MHz and an RF Q-factor of around 90. The device is available in a range of sizes, from 0603 to 1810 (which is 3mm x 3mm to 8mm x 8mm).

The principle of operation of the ILSB0603ERR39K is known as Faraday’s Law of induction. The device is designed to resist any changes in the applied current by generating a magnetic field that opposes the direction of the current. This is known as inductance and it is measured in henries. As the applied current changes, a voltage is generated across the inductor.

The ILSB0603ERR39K is designed for a range of applications including broadcast broadcast radio receivers, amplified speakers, power supplies, sine wave oscillators, EMI filters and SMPS. It is also suitable for use in LED bulbs, automotive applications, test equipment and radar. The inductor can also be used to construct LC tuned circuits for antenna and radio frequency applications.

In summary, the ILSB0603ERR39K is a fixed inductor which features an inductance of 0.39uH, a DCR of 0.74ohms, and a rated current of 4.1A. Its principle of operation is based on Faraday’s Law of induction, which states that a changing current will generate a voltage across the inductor. The device is suitable for a range of applications including broadcast radio receivers, amplified speakers, power supplies, sine wave oscillators, EMI filters and SMPS.

The specific data is subject to PDF, and the above content is for reference