ILSB0603ERR10K

DC Resistance (DCR):	500 mOhm Max
Height - Seated (Max):	0.039" (1.00mm)
Size / Dimension:	0.063" L x 0.031" W (1.60mm x 0.80mm)
Supplier Device Package:	0603 (1608 Metric)
Package / Case:	0603 (1608 Metric)
Mounting Type:	Surface Mount
Inductance Frequency - Test:	25MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	276MHz
Q @ Freq:	15 @ 25MHz
Series:	ILSB-0603
Shielding:	Shielded
Current - Saturation:	--
Current Rating:	50mA
Tolerance:	±10%
Inductance:	100nH
Material - Core:	Ferrite
Type:	Multilayer
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Fixed Inductors

Inductors are passive electrical components used to store and transfer electrical energy, since their function is to oppose the creation of current. Commonly used in circuits to control the flow of electrical current, they can also act as filters, stabilize supply voltage, protect against power transients, and form part of resonant circuits.Fixed inductors were invented by Dutch scientist Pieter van Musschenbroek in 1745, and have been used ever since in a wide variety of electrical and electronic applications. Unlike their variable counterparts (where the inductance can be changed electronically or manually), fixed inductors feature predefined and fixed inductance values, which makes them ideal for applications that don’t need the flexibility of adjustable components. The most basic type of fixed inductor consists of a coil of wire wrapped around an iron core. As the current increases, so does the magnetic field, and the magnetic field induces an opposing voltage across the inductor in order to counteract the increasing current (also known as Lenz’s law).

ILSB0603ERR10K Fixed Inductor

The ILSB0603ERR10K is a fixed inductor manufactured by Murata Electronics North America, Inc. This device is designed to provide electrical noise suppression in high-frequency applications such as receivers, transmitters, modems, computers, and power supplies.The ILSB0603ERR10K features a maximum DC resistance of 10 Kohms, a 1 mm height profile, an inductance value of 0.6 mH, and an inductance tolerance of 10%. As an SMD device, it has a standard body size of 0603 inches (1.5 mm x 0.8 mm) and is rated for reflow soldering at temperatures of up to 260 °C. It has an operating temperature range between -55 °C and +125 °C and is available in a tape and reel (TR) configuration.The ILSB0603ERR10K is ideal for applications where size and efficiency are key, such as in mobile phones and wearable electronics. In mobile phones, the device can help reduce electrical interference, as well as reduce the amount of power consumed. Additionally, the device is highly resistant to soldering temperatures and vibration, making it suitable for automotive applications.

Working Principle of the ILSB0603ERR10K

The ILSB0603ERR10K works on the principle of electromagnetic induction, which was discovered by Michael Faraday in 1831. Electromagnetic induction is the production of voltage in a conductor due to a changing magnetic field. The core of the ILSB0603ERR10K is made up of soft electromagnetic material, while the body of the device is composed of a metal and an air core.When an alternating current (AC) is applied to the primary coil of the inductor, it creates a magnetic field which then induces voltage in the secondary coil. This voltage is AC and of an opposite polarity, and is caused by Lenz’s law. This changing magnetic field then induces its own current in the coils, which is proportional to the rate of change of the current in the primary coil. As the frequency of the AC increases, so does the induced voltage, up to a certain limit. This is known as the self-resonant frequency (SRF) of the device, and is the frequency at which the inductance and capacitance of the device are equal.The ILSB0603ERR10K is designed to maintain a constant inductance value across a wide range of current values. This is mainly due to the fact that the device’s magnetic core is shaped to create a high resistance to flux change, and also due to its unique construction which ensures the coils do not move or distort through normal use. In addition, the device also features temperature compensation, meaning the inductance remains constant over a wide temperature range.

Conclusion

The ILSB0603ERR10K is a fixed inductor manufactured by Murata Electronics North America, Inc. It is specifically designed to provide electrical noise suppression in high-frequency applications, and its features make it ideal for applications such as mobile phones and wearable electronics. The device has a maximum resistance of 10 Kohms, a 1 mm height profile, an inductance value of 0.6 mH, and an inductance tolerance of 10%. It operates on the principle of electromagnetic induction, and is highly resistant to soldering temperatures and vibration. The ILSB0603ERR10K is an excellent choice for applications requiring a high level of efficiency and reliability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description